Forrest, how is the 1u syncinjector coming? When with the PowerInjector Plus images be updated? I imagine the 1u model is simply based on this?
On Tue, Jul 5, 2016 at 9:39 PM, Forrest Christian (List Account) < [email protected]> wrote: > Sadly, no. Cambium changed the port on the 450i drastically enough that > a different electronic circuit is needed to drive it hard enough > > The only currently shipping product we have which will drive the Aux port > hard enough for the 450i is the syncbox12, and only revision i0 or later of > that product. There is also a replacement for the syncpipe deluxe > (SyncBox Junior, Deluxe Version) which should be on the website for > ordering within the next 24 hours or so. But anything else you might have > just won't be compatible due to the changes on the aux port on the 450i. > > On Tue, Jul 5, 2016 at 11:21 AM, Matt <[email protected]> wrote: > >> There is not a way to plug syncpipe into aux port on 450i and generate >> sync? >> >> Looking at powering a PMP450i off a old CMM that outputs 24 volts POE. >> I can use a Tycon 24 to 48 volt POE converter(TP-POE-2456D) to power >> up the 450i but I have no sync. Site I have limited space on and no >> time to rebuild at moment. >> >> >> >> >> On Mon, Jun 20, 2016 at 8:42 PM, Forrest Christian (List Account) >> <[email protected]> wrote: >> > Syncbox or syncinjector rev I0 or later >> > >> > Earlier syncinjectors might get a reprieve but the electrical interface >> on >> > the 450i aux port is enough different that earlier timing port devices >> won't >> > work. >> > >> > On Jun 20, 2016 12:29 PM, "Matt" <[email protected]> wrote: >> >> >> >> Is there a way to make a syncpipe work with 450i yet? >> > > > > -- > *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.* > Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 > [email protected] | http://www.packetflux.com > <http://www.linkedin.com/in/fwchristian> <http://facebook.com/packetflux> > <http://twitter.com/@packetflux> > >
