Looked, but the original FlatPack is not dense enough, the FlatPack2 and HE models are much smaller... I am figuring out if a design for a POP will fit in a single 45U rack with A and B power, each rectifier setup needs to be 3U to 4U height maximum.
On Thu, Jul 14, 2016 at 10:52 AM, Peter Kranz <[email protected]> wrote: > I’d give ebay a scan, usually there are a few flatpack units there.. > > > > > *Peter Kranz*www.UnwiredLtd.com <http://www.unwiredltd.com/> > Desk: 510-868-1614 x100 > Mobile: 510-207-0000 > [email protected] > > > > *From:* Af [mailto:[email protected]] *On Behalf Of *Eric Kuhnke > *Sent:* Monday, July 11, 2016 4:10 PM > *To:* [email protected] > *Subject:* [AFMUG] Anyone purchased an Eltek rectifier system recently? > > > > Looking for a ballpark price estimate off list on this: > > > http://www.eltek.com/detail_products.epl?id=1142848&cat=24677&k1=&k2=&k3=&k4=&close=1 > > It has a distribution bus/fuse/breaker panel in the top 1U, the bottom 1U > populated with 4 x 2000W rectifiers. > > Or something else equivalent that is 2U to max 3U in size, 8kW rated at > 230/240VAC input. > >
