We don't buy those dammed booted cables. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
On Jul 19, 2016 7:50 PM, "George Skorup" <[email protected]> wrote: > It doubly sucks with factory patch cables where the molding covers the tab. > > On 7/19/2016 6:47 PM, Josh Luthman wrote: > > Hey I had that same complaint!!! > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Jul 19, 2016 7:46 PM, "George Skorup" <[email protected]> wrote: > >> Ha. I was just complaining about that today. Tabs facing down towards the >> card, couldn't get my finger in there. Please do the same for the >> GIGE-POE-APCs too. And the GIGE-SS-HV while you're at it. I need more, so >> hopefully WAV is out of stock and I'll get the new ones on the next order. >> :) >> >> On 7/19/2016 5:29 PM, Chuck McCown wrote: >> >> Notice the release tabs are back on the top again... >> >> *From:* Chuck McCown <[email protected]> >> *Sent:* Tuesday, July 19, 2016 4:27 PM >> *To:* [email protected] >> *Subject:* Re: [AFMUG] Cambium's surge protector >> >> This is the current GIGE APC unit. >> >> *From:* Christopher Gray <[email protected]> >> *Sent:* Tuesday, July 19, 2016 8:49 AM >> *To:* [email protected] >> *Subject:* Re: [AFMUG] Cambium's surge protector >> >> I figured I'd open what I had to show see if Chuck might comment on the >> designs. >> >> I've got the old 100Mbps 600SS on the left, the new 1Gbps Cambium in the >> middle, and the new 1 Gbps Mimosa on the right. I didn't have the 1 Gbps >> UBNT unit, but it is the same electrical design as the Mimosa unit. >> >> To address the original question, the ePMP PoE surge protection is just >> spark gap (on the 100 Mbps units, I never opened a 1Gbps unit). I'd be >> inclined to keep using a surge suppressor, despite the additional install >> time. >> >> -Chris >> >> >> On Sat, Jun 25, 2016 at 8:41 PM, Paul McCall <[email protected]> wrote: >> >>> Just noticed that Cambium has a different surge suppressor. We had >>> purchased a large overstock of 600SS for cheap, and are almost running >>> out. I am probably a bit spoiled on having not paid much for the surge >>> protectors, so am going looking. These are mainly for use with ePMP SMs. >>> We use Beehive protectors for APs >>> >>> >>> >>> So, Cambium’s site has these… C000000L033A >>> http://s3.amazonaws.com/cambiumstatic/assets/55aeb0aceb1db13311a99ff0/GigabitEthernetSurgeSuppressor_Dec2015.pdf?download >>> >>> >>> >>> I have heard some people say that the POE provided with the ePMP SMs >>> included surge protection, therefore negating the need for a separate surge >>> protector. >>> >>> >>> >>> What sayeth the crowd? >>> >>> >>> >>> Paul >>> >>> >>> >>> Paul McCall, President >>> >>> PDMNet, Inc. / Florida Broadband, Inc. >>> >>> 658 Old Dixie Highway >>> >>> Vero Beach, FL 32962 >>> >>> 772-564-6800 >>> >>> [email protected] >>> >>> www.pdmnet.com >>> >>> www.floridabroadband.com >>> >>> >>> >>> >>> >> >> >> >> >
