Are you sure that’s a 600SS on the left? Looks like an earlier model. From: Christopher Gray Sent: Tuesday, July 19, 2016 9:49 AM To: [email protected] Subject: Re: [AFMUG] Cambium's surge protector
I figured I'd open what I had to show see if Chuck might comment on the designs. I've got the old 100Mbps 600SS on the left, the new 1Gbps Cambium in the middle, and the new 1 Gbps Mimosa on the right. I didn't have the 1 Gbps UBNT unit, but it is the same electrical design as the Mimosa unit. To address the original question, the ePMP PoE surge protection is just spark gap (on the 100 Mbps units, I never opened a 1Gbps unit). I'd be inclined to keep using a surge suppressor, despite the additional install time. -Chris On Sat, Jun 25, 2016 at 8:41 PM, Paul McCall <[email protected]> wrote: Just noticed that Cambium has a different surge suppressor. We had purchased a large overstock of 600SS for cheap, and are almost running out. I am probably a bit spoiled on having not paid much for the surge protectors, so am going looking. These are mainly for use with ePMP SMs. We use Beehive protectors for APs So, Cambium’s site has these… C000000L033A http://s3.amazonaws.com/cambiumstatic/assets/55aeb0aceb1db13311a99ff0/GigabitEthernetSurgeSuppressor_Dec2015.pdf?download I have heard some people say that the POE provided with the ePMP SMs included surge protection, therefore negating the need for a separate surge protector. What sayeth the crowd? Paul Paul McCall, President PDMNet, Inc. / Florida Broadband, Inc. 658 Old Dixie Highway Vero Beach, FL 32962 772-564-6800 [email protected] www.pdmnet.com www.floridabroadband.com
