Hey I had that same complaint!!!

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

On Jul 19, 2016 7:46 PM, "George Skorup" <[email protected]> wrote:

> Ha. I was just complaining about that today. Tabs facing down towards the
> card, couldn't get my finger in there. Please do the same for the
> GIGE-POE-APCs too. And the GIGE-SS-HV while you're at it. I need more, so
> hopefully WAV is out of stock and I'll get the new ones on the next order.
> :)
>
> On 7/19/2016 5:29 PM, Chuck McCown wrote:
>
> Notice the release tabs are back on the top again...
>
> *From:* Chuck McCown <[email protected]>
> *Sent:* Tuesday, July 19, 2016 4:27 PM
> *To:* [email protected]
> *Subject:* Re: [AFMUG] Cambium's surge protector
>
> This is the current GIGE APC unit.
>
> *From:* Christopher Gray <[email protected]>
> *Sent:* Tuesday, July 19, 2016 8:49 AM
> *To:* [email protected]
> *Subject:* Re: [AFMUG] Cambium's surge protector
>
> I figured I'd open what I had to show see if Chuck might comment on the
> designs.
>
> I've got the old 100Mbps 600SS on the left, the new 1Gbps Cambium in the
> middle, and the new 1 Gbps Mimosa on the right. I didn't have the 1 Gbps
> UBNT unit, but it is the same electrical design as the Mimosa unit.
>
> To address the original question, the ePMP PoE surge protection is just
> spark gap (on the 100 Mbps units, I never opened a 1Gbps unit). I'd be
> inclined to keep using a surge suppressor, despite the additional install
> time.
>
> -Chris
>
>
> On Sat, Jun 25, 2016 at 8:41 PM, Paul McCall <[email protected]> wrote:
>
>> Just noticed that Cambium has a different surge suppressor.   We had
>> purchased a large overstock of 600SS for cheap, and are almost running
>> out.  I am probably a bit spoiled on having not paid much for the surge
>> protectors, so am going looking.  These are mainly for use with ePMP SMs.
>> We use Beehive protectors for APs
>>
>>
>>
>> So, Cambium’s site has these… C000000L033A
>> http://s3.amazonaws.com/cambiumstatic/assets/55aeb0aceb1db13311a99ff0/GigabitEthernetSurgeSuppressor_Dec2015.pdf?download
>>
>>
>>
>> I have heard some people say that the POE provided with the ePMP SMs
>> included surge protection, therefore negating the need for a separate surge
>> protector.
>>
>>
>>
>> What sayeth the crowd?
>>
>>
>>
>> Paul
>>
>>
>>
>> Paul McCall, President
>>
>> PDMNet, Inc. / Florida Broadband, Inc.
>>
>> 658 Old Dixie Highway
>>
>> Vero Beach, FL 32962
>>
>> 772-564-6800
>>
>> [email protected]
>>
>> www.pdmnet.com
>>
>> www.floridabroadband.com
>>
>>
>>
>>
>>
>
>
>
>

Reply via email to