Considering rfarmor guy = netonix guy, probably not ;) On Thu, Sep 15, 2016 at 7:48 AM, That One Guy /sarcasm < [email protected]> wrote:
> Talk to RFArmor guy, maybe he can knock them out in his garage > > On Thu, Sep 15, 2016 at 7:48 AM, Tyler Treat <[email protected] > > wrote: > >> Looks like this outfit could do that type of thing... Not sure if >> volume would be an issue though. >> >> >> http://www.evsmetal.com/work#towork-1 >> >> >> ------------------------------ >> *From:* Af <[email protected]> on behalf of Ken Hohhof < >> [email protected]> >> *Sent:* Thursday, September 15, 2016 7:00 AM >> >> *To:* [email protected] >> *Subject:* Re: [AFMUG] Leads wanted for a source for 1U rackmount >> enclosures. >> >> Back when I was in the telephone equipment industry, there were a >> bazillion custom sheet metal shops in and around Addison, IL. I don’t know >> how many are still around. One we used a lot was TJ Fabricators. >> >> >> *From:* Jim Bouse [Brazos WiFi] <[email protected]> >> *Sent:* Thursday, September 15, 2016 6:17 AM >> *To:* [email protected] >> *Subject:* Re: [AFMUG] Leads wanted for a source for 1U rackmount >> enclosures. >> >> I would check with Kam Fab near Austin TX. >> They make all kinds of sheet metal stuff. >> >> Good luck. >> >> >> Jim Bouse >> >> Owner >> >> Brazos WiFi >> >> 979-985-5912 >> >> [email protected] >> >> >> -------- Original message -------- >> From: "Forrest Christian (List Account)" <[email protected]> >> Date: 9/15/16 6:08 AM (GMT-06:00) >> To: af <[email protected]> >> Subject: [AFMUG] Leads wanted for a source for 1U rackmount enclosures. >> >> @!#?@!. >> >> My enclosure manufacturer for the rackmount injectors seems to be AWOL. >> Lots of productive conversations back and forth over the past few months, >> but now it comes time to actually finalize prints and order the first >> batch, and well.. nothing. Evidently sending them a finalized drawing and >> asking for instructions on how to get these ordered is a good way to get >> them to quit responding. >> >> I'm still hopeful that this is just a bump on the road (someone's on >> vacation, they're backlogged, etc.), but this just isn't a good sign. >> >> If anyone is aware of a supplier which can make 1U enclosures, in >> reasonable quantities (50-100 at a time, not sure how many a year, >> hopefully lots more than that), and most importantly at a reasonable price, >> I'd appreciate the lead. >> >> I'm reviewing all of the well-known enclosure manufacturers (Bud, OKW, >> Hammond, Schroff, etc.) to see if I can fit into one of them and can get >> them modified at a price which I think all of you can afford. Past >> experience indicates to me that there is a good chance that this isn't >> going to be productive, which is why I'm asking. >> >> -- >> *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.* >> Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 >> [email protected] | http://www.packetflux.com >> <http://www.linkedin.com/in/fwchristian> >> <http://facebook.com/packetflux> <http://twitter.com/@packetflux> >> >> > > > -- > If you only see yourself as part of the team but you don't see your team > as part of yourself you have already failed as part of the team. > -- *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.* Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 [email protected] | http://www.packetflux.com <http://www.linkedin.com/in/fwchristian> <http://facebook.com/packetflux> <http://twitter.com/@packetflux>
