I've said all along, it's probably easiest to convert a Remec round
interface, i.e. Trango ApexPlus and ApexLynx, of course ApexLynx is new
enough that you probably wouldn't replace it with an AF11. And we have a
metric shitload of ApexPlus deployed on Trango OEM dishes and Radiowaves
HPx-11R's.
IIRC, the PTP800 ODU is just a rebranded Remec. In fact, I think it is
exactly the same as the ApexPlus and GigaPlus ODU. CTI's Apex9 LL is
exactly the same as the PTP800, just an OEM IDU and a Remec ODU.
On 3/21/2017 10:55 AM, Chuck McCown wrote:
I can do the Remec adapter, but you will still need a circular nose on
the antenna.
*From:* Josh Baird
*Sent:* Tuesday, March 21, 2017 9:25 AM
*To:* af@afmug.com
*Subject:* Re: [AFMUG] New WBMFG products?
Yeah - it's in service unfortunately. They are Remnec.
On Tue, Mar 21, 2017 at 11:17 AM, Chuck McCown <ch...@wbmfg.com> wrote:
Could do. I have done lots of replacement and oddball feedhorns.
Is that dish currently in service? I would need to have the
current feedhorn for about a half hour to make sure I have the
dimensions down correctly.
*From:* Josh Baird
*Sent:* Tuesday, March 21, 2017 9:00 AM
*To:* af@afmug.com
*Subject:* Re: [AFMUG] New WBMFG products?
So - we are looking for an adapter that will allow us to re-use
our single polarity Commscope dishes (currently with PTP-800
radios). Anything up your sleeve for that?
On Tue, Mar 21, 2017 at 10:24 AM, Chuck McCown <ch...@wbmfg.com>
wrote:
Kinda. Did a session at AnimalFarm about it. Not sure if I
will release it or not. I have adapters for DragonWave,
Remec, Exalt and SAF dishes. But there did not seem to be
much enthusiasm.
*From:* Josh Baird
*Sent:* Tuesday, March 21, 2017 8:21 AM
*To:* af@afmug.com
*Subject:* [AFMUG] New WBMFG products?
Hiya Chuck,
I seem to remember you talking about announcing something new
for the AF11x? Did this ever happen? Any other new products
that were announced at WISPAmerica this year?
Josh
