I'm interested in adapters. But we haven't gotten to that point in time yet. I think you have to give it more time before you see more orders...
Jon Langeler Michwave Technologies, Inc. > On Mar 21, 2017, at 1:05 PM, Chuck McCown <[email protected]> wrote: > > I can convert a rectangular feed horn to round and then to connectorized. > But I have to have the feedhorn so that means the link goes down until the > conversion is complete. > > From: George Skorup > Sent: Tuesday, March 21, 2017 10:49 AM > To: [email protected] > Subject: Re: [AFMUG] New WBMFG products? > > I've said all along, it's probably easiest to convert a Remec round > interface, i.e. Trango ApexPlus and ApexLynx, of course ApexLynx is new > enough that you probably wouldn't replace it with an AF11. And we have a > metric shitload of ApexPlus deployed on Trango OEM dishes and Radiowaves > HPx-11R's. > > IIRC, the PTP800 ODU is just a rebranded Remec. In fact, I think it is > exactly the same as the ApexPlus and GigaPlus ODU. CTI's Apex9 LL is exactly > the same as the PTP800, just an OEM IDU and a Remec ODU. > >> On 3/21/2017 10:55 AM, Chuck McCown wrote: >> I can do the Remec adapter, but you will still need a circular nose on the >> antenna. >> >> From: Josh Baird >> Sent: Tuesday, March 21, 2017 9:25 AM >> To: [email protected] >> Subject: Re: [AFMUG] New WBMFG products? >> >> Yeah - it's in service unfortunately. They are Remnec. >> >>> On Tue, Mar 21, 2017 at 11:17 AM, Chuck McCown <[email protected]> wrote: >>> Could do. I have done lots of replacement and oddball feedhorns. Is that >>> dish currently in service? I would need to have the current feedhorn for >>> about a half hour to make sure I have the dimensions down correctly. >>> >>> From: Josh Baird >>> Sent: Tuesday, March 21, 2017 9:00 AM >>> To: [email protected] >>> Subject: Re: [AFMUG] New WBMFG products? >>> >>> So - we are looking for an adapter that will allow us to re-use our single >>> polarity Commscope dishes (currently with PTP-800 radios). Anything up >>> your sleeve for that? >>> >>> On Tue, Mar 21, 2017 at 10:24 AM, Chuck McCown <[email protected]> wrote: >>>> Kinda. Did a session at AnimalFarm about it. Not sure if I will release >>>> it or not. I have adapters for DragonWave, Remec, Exalt and SAF dishes. >>>> But there did not seem to be much enthusiasm. >>>> >>>> From: Josh Baird >>>> Sent: Tuesday, March 21, 2017 8:21 AM >>>> To: [email protected] >>>> Subject: [AFMUG] New WBMFG products? >>>> >>>> Hiya Chuck, >>>> >>>> I seem to remember you talking about announcing something new for the >>>> AF11x? Did this ever happen? Any other new products that were announced >>>> at WISPAmerica this year? >>>> >>>> Josh >
