the main thing to look for with a VDSL2 converter bridge pair is, will it do the 30a profile (30MHz). Depending on how noisy your lines are or loop length you may need to flip a switch to change between 17a profile or 30a. But ideally 30a profile should actually have slightly more bandwidth that is required to bridge 100BaseTX at line rate.
On Mon, Apr 3, 2017 at 8:07 AM, Josh Luthman <[email protected]> wrote: > Those both look perfect! Even better than I was hoping. > > I'm going to try the Planet one since it's cheaper+I know the name. > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Mon, Apr 3, 2017 at 11:00 AM, Adam Moffett <[email protected]> wrote: > >> Google gave me this one: >> http://www.planet.com.tw/en/product/product.php?id=26448#spec >> >> 100FD at 300m. >> >> ------ Original Message ------ >> From: "Josh Luthman" <[email protected]> >> To: "[email protected]" <[email protected]> >> Sent: 4/3/2017 10:54:14 AM >> Subject: [AFMUG] Using phone two wire for bridged link >> >> I'm looking for something I believe was discussed here multiple times. I >> have old copper going between a few stories in the building and I need to >> get bandwidth up there. Isn't there some box that people have used that >> will run with 2 wire or any kind of wire essentially and then you have >> 100baseT? >> >> Josh Luthman >> Office: 937-552-2340 <(937)%20552-2340> >> Direct: 937-552-2343 <(937)%20552-2343> >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> >
