In-Wall AP. In this case the UBNT UAP-AC-IW. A lot of in wall access points have an RJ11 pass through for phones but being UBNT, this one doesn't. Looking for something like the attached image, except more like just the outer ring. with an empty center so I can mount the in wall AP on top of it and pass the phone connection out the side or bottom.
[image: Inline image 1] On Thu, May 4, 2017 at 11:20 AM, Chuck McCown <[email protected]> wrote: > Not clear, in wall AP or in wall ATA? > I would think a wall plate with both RJ45 and RJ11 on it. > > *From:* Carl Peterson > *Sent:* Thursday, May 04, 2017 8:37 AM > *To:* [email protected] > *Subject:* [AFMUG] Phone line passthrough for in-wall AP > > Looking at installing a few hundred in wall APs somewhere where they are > still using the phone lines. There is currently Cat5 lines, one phone, one > data, run to a single low voltage box. Rather then having to cut and > install a new low voltage frame, does anyone know of something like an > extension ring with an RJ11 port on the side? Seems simple and I feel like > I have seen them before but can't seem to find anything like it. > -- Carl Peterson *PORT NETWORKS* 401 E Pratt St, Ste 2553 Baltimore, MD 21202 (410) 637-3707
