The fingertips, they do get a little raw untwisting the wires with the 23 Gauge. The trick we do is cut the wires at 45 degrees to put the insert on. After that, it's a piece of cake.
Rory -----Original Message----- From: Af [mailto:[email protected]] On Behalf Of Jay Weekley Sent: Wednesday, June 7, 2017 7:43 AM To: [email protected] Subject: Re: [AFMUG] Shielded Cat6 recommendation No, it's not very friendly when putting the plugs on for sure. [email protected] wrote: > I really hate CAT6 when it comes to terminating it. One would think > CAT5e would be just fine. > > -----Original Message----- From: Adam Moffett > Sent: Wednesday, June 7, 2017 8:27 AM > To: [email protected] > Subject: Re: [AFMUG] Shielded Cat6 recommendation > > Cat 5e and Cat6 are both intended to run GigE at 100 meters. Did they > elaborate on why that would make a difference? > I would question them on that before I start sending climbers up, but > I'm an a**hole. > > > ------ Original Message ------ > From: "Jay Weekley" <[email protected]> > To: "[email protected]" <[email protected]> > Sent: 6/7/2017 10:24:27 AM > Subject: [AFMUG] Shielded Cat6 recommendation > >> We recently received a recommendation from Mimosa to replace our >> shielded Cat 5 with Cat6. We've been using Shireen lately and they >> have a Cat 6 product. What would you use? Has anyone had problems >> with using Cat 5 with Mimosa? > > > --- > This email has been checked for viruses by AVG. > http://www.avg.com > >
