For clarification, this is for UniFi VoIP. On Aug 9, 2017 7:20 PM, "Josh Reynolds" <[email protected]> wrote:
> For what it's worth, UniFi provisioning doesn't happen via single config > file. You will need to generate a config file with the Mac address as part > of the file name. Search Google or UBNT.com for the article. > > I have some in my house. I use my edgerouter to provide the tftp source as > my cloudkey, and my cloudkey has asterisk running on it. > > I could probably setup a system to generate a config on the fly by > scraping info from the DHCP request and then generating a config file with > the proper filename and inputting info from sip.conf for the user info if > need be, I just haven't needed to. > > On Aug 9, 2017 7:08 PM, "Nathan Anderson" <[email protected]> wrote: > >> I've put together an OpenWRT-based Asterisk VM (with Asterisk-GUI on top >> instead of FreePBX) that knows how to generate the provisioning files for >> Polycom phones from templates and offers them up via HTTP instead of TFTP. >> I can bang out a new PBX in an afternoon with it. I still usually pair >> this with a MikroTik doing the DHCP server bit. >> >> >> >> If you have never done any VoIP before and perhaps need some >> hand-holding, I haven't personally used it, but 3CX, which is a commercial >> Windows product, seems to come highly recommended. If you want something >> free, though, there is probably going to be a steeper learning curve. >> >> >> >> The other part you are going to have to consider is the hardware. If you >> can get phone service handed off to you as pure SIP/IP, then great. But if >> you actually need to take analog copper or TDM lines in from the phone >> company, then you are going to need to either get a PSTN <-> SIP device >> that meets your needs or purchase the necessary interface cards for the >> PC/server you are running the PBX software on. >> >> >> >> Good luck, >> >> >> >> -- Nathan >> >> >> >> *From:* Af [mailto:[email protected]] *On Behalf Of *Adam Moffett >> *Sent:* Wednesday, August 09, 2017 2:04 PM >> *To:* [email protected] >> *Subject:* Re: [AFMUG] Best BPX to work with Unifi Phones >> >> >> >> I've used a Mikrotik as the provisioning server in a lab setup.....don't >> think I ever did it in real life. It can set the required DHCP options and >> can be a TFTP server, and that's what you really need. >> >> >> >> I liked the Sipura/Linksys/Cisco SPA phones because you could configure >> via the web page then export the XML config. Then duplicate and edit as >> needed. It was hard to beat that for simplicity. I'm a few years out of >> touch on VoIP, so I have no idea what phones are out there these days. >> >> >> >> >> >> ------ Original Message ------ >> >> From: "Josh Reynolds" <[email protected]> >> >> To: [email protected] >> >> Sent: 8/9/2017 4:27:36 PM >> >> Subject: Re: [AFMUG] Best BPX to work with Unifi Phones >> >> >> >> PBX. >> >> >> >> Simple? VoIP is not simple. FreePBX is as simple as it gets, and it's >> only simple because it is limiting. >> >> >> >> For provisioning you will need a tftp server, the ability to set DHCP >> options, and a basic grasp of XML. >> >> >> >> On Aug 9, 2017 2:35 PM, "Timothy Steele" <[email protected]> >> wrote: >> >> Anyone Working With Unifi Phones? >> >> >> >> going to island of Palau to re do a network and VOIP System if they do >> not get Bombed by north Korea first :( but anyway is there like a super >> simple BPX out there to connect with unifi phones would only have 2 weeks >> to get this all done soo looking for easy lol >> >>
