>>If that plastic slide/snap adapter is included with each radio, Affirmative !
Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email: [email protected] > From: [email protected] > To: [email protected] > Sent: Thursday, October 5, 2017 10:33:23 AM > Subject: Re: [AFMUG] Fw: AF11x adapters > If that plastic slide/snap adapter is included with each radio, then we should > be good. > I designed the spacing and everything assuming that adapter would be used with > each unit. > From: Faisal Imtiaz > Sent: Thursday, October 5, 2017 8:28 AM > To: [email protected] > Subject: Re: [AFMUG] Fw: AF11x adapters > Picture of the Jirous Adapter attached.... > rest of the answers are inline below. > If you have any questions, feel free to call me. > Regards. > Faisal Imtiaz > Snappy Internet & Telecom > 7266 SW 48 Street > Miami, FL 33155 > Tel: 305 663 5518 x 232 > Help-desk: (305)663-5518 Option 2 or Email: [email protected] >> From: "Chuck McCown" <[email protected]> >> To: [email protected] >> Sent: Thursday, October 5, 2017 8:58:26 AM >> Subject: [AFMUG] Fw: AF11x adapters >> Made Gino some adapters so he can use AF11x radios on Remec mount antennas. >> I made the hole pattern to match a plastic slide and snap adapter that came >> with >> the radio I have. > That should be fine >> But not sure if that part is included with all AF11X radios. Gino is asking >> about how the radio is supposed to mount to my adapter. >> If the slide/snap is not automatically included in all shipments, I need to >> alter the bolt pattern to allow mounting of the radio when that part is not >> present. He needs some more of these adapters and I want to make sure to send >> him stuff that does not require any work on his part. >> Do you AF11X users know if that slid/snap adapter plate is included with all >> radios? > Yes that slide/snap adapter is included with each of the AF11x (That is how > they > slide/attach to the UBNT dishes). >> If so, can we buy more for Gino to use right now in the event he has lost >> his? >> If not how should I alter the mount so the radio can still fit onto the >> adapter?
