I think what he's trying to do though is enable the DHCP client on all
of the SMs. So Option 43 w/o the SM looking for it is kinda moot.
On 12/26/2017 7:17 AM, Adam Moffett wrote:
I did that once with a macro plugin in Firefox. I had the macro loop
through the RF Private IP range until the highest LUID number on the
AP, then ran it again for each AP. That still wasn't very fast.
Can you distribute the CnMaestro URL with Option 43? That works on
EPMP as long as you haven't already set the URL to something.
------ Original Message ------
From: "Andreas Wiatowski" <[email protected]
<mailto:[email protected]>>
To: "[email protected]" <[email protected] <mailto:[email protected]>>
Sent: 12/26/2017 8:08:32 AM
Subject: Re: [AFMUG] Mass changes to specific config on 450 network
SNMP write is off, is there a way to turn that up enmass?
Cheers,
Andreas Wiatowski, CEO
Silo Wireless Inc.
1-866-727-4138 x-600
http://www.silowireless.com
Wireless | Fibre | VoIP | PBX | IPTV
On Dec 25, 2017, at 4:58 PM, George Skorup <[email protected]
<mailto:[email protected]>> wrote:
If you have SNMP write enabled on the SMs, then use the AP's SNMP
proxy. IIRC, it's something like <AP proxy OID>.LUID.<SM target OID
of interest>. Should be in the AP MIB.
On 12/25/2017 11:36 AM, Andreas Wiatowski wrote:
Hi Everyone,
We have turned up the on premise version of cnMaestro and it turns
up like a charm. Kudos to the Cambium team! We use PROXMOX, a free
virtualization product. All we had to do is untar the OVA pull out
the vmdk and convert to qcow2.
So, we have been a CNUT shop. CNUT works well through web proxy
and we have never seen a need to put a mgmnt IP on the SM. Now
that we want to use the on premise, we are taking our entire
network up to 15.1.2.1 and we are enabling remote management on the
WAN for NAT SM and turning on ICMP. For bridged we are enabling
public access and DHCP so it grabs an address for management. ALL
is working well BUT we need to log into each and every SM and make
these changes.
My question is, is there an easier way? We have a custom r/w
string in each SM, but no IP access, just WEB PROXY.
Any help is appreciated, we have 100's of AP and 1000's of SM in
the field.
Cheers,
Andreas Wiatowski, CEO
Silo Wireless Inc.
1-866-727-4138 x-600
http://www.silowireless.com <http://www.silowireless.com/>
Wireless | Fibre | VoIP | PBX | IPTV
Silo Wireless is a Proud Member of:
CanWISP http://www.canwisp.ca <http://www.canwisp.ca>
WISPA http://wispa.org
Brantford Brant Chamber of Commerce
Paris Chamber of Commerce
Cambridge Chamber of Commerce
_________________________________
The contents of this email message and any attachments are intended
solely for the addressee(s) and may contain confidential and/or
privileged information and may be legally protected from
disclosure. If you are not the intended recipient of this message
or their agent, or if this message has been addressed to you in
error, please immediately alert the sender by reply email and then
delete this message and any attachments. If you are not the
intended recipient, you are hereby notified that any use,
dissemination, copying, or storage of this message or its
attachments is strictly prohibited.
