The RF Private IP is how we do mass config changes with SNMP scripts. If SNMP write is off, you can use cURL to turn it on:
curl "http://x.x.x.y/himom.cgi?SNMPReadOnly=0&ok=Save+Changes"; On Tue, Dec 26, 2017 at 7:09 AM, Adam Moffett <dmmoff...@gmail.com> wrote: > RF Private IP > You configure the first 3 octets and the last octet is the LUID number of > the SM. > On the router adjacent to the AP, add a static route for that /24 with the > AP's IP as the gateway. > > > ------ Original Message ------ > From: "Andreas Wiatowski" <andr...@silowireless.com> > To: "af@afmug.com" <af@afmug.com> > Sent: 12/25/2017 12:36:53 PM > Subject: [AFMUG] Mass changes to specific config on 450 network > > Hi Everyone, > > > > We have turned up the on premise version of cnMaestro and it turns up like > a charm. Kudos to the Cambium team! We use PROXMOX, a free virtualization > product. All we had to do is untar the OVA pull out the vmdk and convert to > qcow2. > > > > So, we have been a CNUT shop. CNUT works well through web proxy and we > have never seen a need to put a mgmnt IP on the SM. Now that we want to > use the on premise, we are taking our entire network up to 15.1.2.1 and we > are enabling remote management on the WAN for NAT SM and turning on ICMP. > For bridged we are enabling public access and DHCP so it grabs an address > for management. ALL is working well BUT we need to log into each and every > SM and make these changes. > > > > My question is, is there an easier way? We have a custom r/w string in > each SM, but no IP access, just WEB PROXY. > > > > Any help is appreciated, we have 100's of AP and 1000's of SM in the field. > > > > > > > > Cheers, > > > > Andreas Wiatowski, CEO > > Silo Wireless Inc. > > 1-866-727-4138 x-600 <(866)%20727-4138> > > http://www.silowireless.com > > Wireless | Fibre | VoIP | PBX | IPTV > > > > Silo Wireless is a Proud Member of: > > CanWISP http://www.canwisp.ca > > WISPA http://wispa.org > > Brantford Brant Chamber of Commerce > > Paris Chamber of Commerce > > Cambridge Chamber of Commerce > > > > > > _________________________________ > > The contents of this email message and any attachments are intended solely > for the addressee(s) and may contain confidential and/or privileged > information and may be legally protected from disclosure. If you are not > the intended recipient of this message or their agent, or if this message > has been addressed to you in error, please immediately alert the sender by > reply email and then delete this message and any attachments. If you are > not the intended recipient, you are hereby notified that any use, > dissemination, copying, or storage of this message or its attachments is > strictly prohibited. > > > >
