Isn't the 3k is supposed to give us 4x4 MIMO and beam steering? And not just uplink beam steering like the 2k BSA, but also downlink, IIRC.

On 2/9/2018 3:22 PM, Jeff Broadwick - Lists wrote:
The 300s will work with both legacy 1000/2000 and with the new 3000.

Jeff Broadwick
CTIconnect
312-205-2519 Office
574-220-7826 Cell
jbroadw...@cticonnect.com <mailto:jbroadw...@cticonnect.com>

On Feb 9, 2018, at 3:13 PM, Mathew Howard <mhoward...@gmail.com <mailto:mhoward...@gmail.com>> wrote:

Well, they'll support 256QAM, so if the signals are good enough, you'll get some more out of them because of that. Beyond that, I don't know that there will be much in the way of gains on a 20mhz channel. As far as I know, they're backwards compatible with 1000 and 2000 APs, but it's possible something has changed there. At any rate, all of the old SMs should be work with the 3000 APs.

On Fri, Feb 9, 2018 at 2:01 PM, Steve Jones <thatoneguyst...@gmail.com <mailto:thatoneguyst...@gmail.com>> wrote:

    will 20mhz channels give you any more jesus juice than 20mhz
    channels with the 200APs?
    as i understand it its only a single revision backward compatible
    though, 1000 series will not work with it but 2000 will?

    On Fri, Feb 9, 2018 at 12:14 PM, Jeff Broadwick - Lists
    <jeffl...@att.net <mailto:jeffl...@att.net>> wrote:

        300s should ship from Asia, along with the PTP550s with a
        week.  Figure 30-45 days from then.

        Jeff Broadwick
        CTIconnect
        312-205-2519 <tel:%28312%29%20205-2519> Office
        574-220-7826 <tel:%28574%29%20220-7826> Cell
        jbroadw...@cticonnect.com <mailto:jbroadw...@cticonnect.com>

        On Feb 9, 2018, at 1:02 PM, Mathew Howard
        <mhoward...@gmail.com <mailto:mhoward...@gmail.com>> wrote:

        They've been taking orders for the SM (Force 300) for
        awhile, but I still haven't gotten the ones I have on
        order... I expect they'll be shipping any day now. The epmp
        3000 APs probably still won't be out for a few more months,
        from what I've heard.

        On Feb 9, 2018 11:12 AM, "Adam Moffett" <dmmoff...@gmail.com
        <mailto:dmmoff...@gmail.com>> wrote:

            I believe SM, but not AP

            ------ Original Message ------
            From: "Jon Langeler" <jon-ispli...@michwave.net
            <mailto:jon-ispli...@michwave.net>>
            To: af@afmug.com <mailto:af@afmug.com>
            Sent: 2/9/2018 12:10:18 PM
            Subject: [AFMUG] EPMP AC version?

                Is that out yet?

                Jon Langeler
                Michwave Technologies, Inc.





Reply via email to