This is all I have right now:


Jeff Broadwick
CTIconnect
312-205-2519 Office
574-220-7826 Cell
jbroadw...@cticonnect.com

> On Feb 9, 2018, at 4:33 PM, George Skorup <george.sko...@cbcast.com> wrote:
> 
> Isn't the 3k is supposed to give us 4x4 MIMO and beam steering? And not just 
> uplink beam steering like the 2k BSA, but also downlink, IIRC.
> 
>> On 2/9/2018 3:22 PM, Jeff Broadwick - Lists wrote:
>> The 300s will work with both legacy 1000/2000 and with the new 3000.
>> 
>> Jeff Broadwick
>> CTIconnect
>> 312-205-2519 Office
>> 574-220-7826 Cell
>> jbroadw...@cticonnect.com
>> 
>> On Feb 9, 2018, at 3:13 PM, Mathew Howard <mhoward...@gmail.com> wrote:
>> 
>>> Well, they'll support 256QAM, so if the signals are good enough, you'll get 
>>> some more out of them because of that. Beyond that, I don't know that there 
>>> will be much in the way of gains on a 20mhz channel. As far as I know, 
>>> they're backwards compatible with 1000 and 2000 APs, but it's possible 
>>> something has changed there. At any rate, all of the old SMs should be work 
>>> with the 3000 APs. 
>>> 
>>> On Fri, Feb 9, 2018 at 2:01 PM, Steve Jones <thatoneguyst...@gmail.com> 
>>> wrote:
>>>> will 20mhz channels give you any more jesus juice than 20mhz channels with 
>>>> the 200APs?
>>>> as i understand it its only a single revision backward compatible though, 
>>>> 1000 series will not work with it but 2000 will?
>>>> 
>>>>> On Fri, Feb 9, 2018 at 12:14 PM, Jeff Broadwick - Lists 
>>>>> <jeffl...@att.net> wrote:
>>>>> 300s should ship from Asia, along with the PTP550s with a week.  Figure 
>>>>> 30-45 days from then.
>>>>> 
>>>>> Jeff Broadwick
>>>>> CTIconnect
>>>>> 312-205-2519 Office
>>>>> 574-220-7826 Cell
>>>>> jbroadw...@cticonnect.com
>>>>> 
>>>>> On Feb 9, 2018, at 1:02 PM, Mathew Howard <mhoward...@gmail.com> wrote:
>>>>> 
>>>>>> They've been taking orders for the SM (Force 300) for awhile, but I 
>>>>>> still haven't gotten the ones I have on order... I expect they'll be 
>>>>>> shipping any day now. The epmp 3000 APs probably still won't be out for 
>>>>>> a few more months, from what I've heard. 
>>>>>> 
>>>>>> On Feb 9, 2018 11:12 AM, "Adam Moffett" <dmmoff...@gmail.com> wrote:
>>>>>>> I believe SM, but not AP
>>>>>>> 
>>>>>>> ------ Original Message ------
>>>>>>> From: "Jon Langeler" <jon-ispli...@michwave.net>
>>>>>>> To: af@afmug.com
>>>>>>> Sent: 2/9/2018 12:10:18 PM
>>>>>>> Subject: [AFMUG] EPMP AC version?
>>>>>>> 
>>>>>>>> Is that out yet?
>>>>>>>> 
>>>>>>>> Jon Langeler
>>>>>>>> Michwave Technologies, Inc.
>>>>>>>> 
>>>>>>> 
>>>> 
>>> 
> 

Reply via email to