Still well helps keep it more confined and precise... except in storm well where turbulence wreaks havoc on it. Shake rattle and roll...
Jaime Solorza On Feb 17, 2018 1:22 PM, <[email protected]> wrote: > I have used submersible pressure on municipal water tank telemetry many > times. > I guess it would work equally well in a lake. > .433 psi per foot. > > *From:* Jaime Solorza > *Sent:* Saturday, February 17, 2018 1:10 PM > *To:* Animal Farm > *Subject:* Re: [AFMUG] Lake level monitoring > > You could use a stilling well with ultrasonic, or a submersible pressure, > you could do a capacitance probe > > Jaime Solorza > > On Feb 17, 2018 9:12 AM, "Mitch Koep" <[email protected]> wrote: > >> I saw a system that used the same system for Water tower level measuring >> >> Installed a screened culvert vertical, about two feet off the bottom to >> stop >> >> wave action and device float inside the culvert and a PLC controller with >> a radio link >> >> It seemed to work very well >> >> You might want to check and see what is used for sewer ponds as well >> >> Mitch >> >> >> On 2/16/2018 3:51 PM, Roland Houin wrote: >> >>> I have a customer needing to monitor lake levels >>> need accurate method (gps hopefully) to measure level above msl. >>> >>> >>> Anybody have any suggestions? >>> >>> >>> Roland Houin >>> Fourway.Net >>> >>> >>> >>
