I think that is my favorite idea.
Adam Moffett wrote:
Mark feet and inches on a pier and point a camera at it. :)
------ Original Message ------
From: "Jaime Solorza" <[email protected]
<mailto:[email protected]>>
To: "Animal Farm" <[email protected] <mailto:[email protected]>>
Sent: 2/17/2018 3:34:26 PM
Subject: Re: [AFMUG] Lake level monitoring
Still well helps keep it more confined and precise... except in storm
well where turbulence wreaks havoc on it. Shake rattle and roll...
Jaime Solorza
On Feb 17, 2018 1:22 PM, <[email protected] <mailto:[email protected]>>
wrote:
I have used submersible pressure on municipal water tank
telemetry many times.
I guess it would work equally well in a lake.
.433 psi per foot.
*From:* Jaime Solorza
*Sent:* Saturday, February 17, 2018 1:10 PM
*To:* Animal Farm
*Subject:* Re: [AFMUG] Lake level monitoring
You could use a stilling well with ultrasonic, or a submersible
pressure, you could do a capacitance probe
Jaime Solorza
On Feb 17, 2018 9:12 AM, "Mitch Koep" <[email protected]> wrote:
I saw a system that used the same system for Water tower
level measuring
Installed a screened culvert vertical, about two feet off the
bottom to stop
wave action and device float inside the culvert and a PLC
controller with a radio link
It seemed to work very well
You might want to check and see what is used for sewer ponds
as well
Mitch
On 2/16/2018 3:51 PM, Roland Houin wrote:
I have a customer needing to monitor lake levels
need accurate method (gps hopefully) to measure level
above msl.
Anybody have any suggestions?
Roland Houin
Fourway.Net
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
Virus-free. www.avg.com
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
