Mark feet and inches on a pier and point a camera at it. :)
------ Original Message ------
From: "Jaime Solorza" <[email protected]>
To: "Animal Farm" <[email protected]>
Sent: 2/17/2018 3:34:26 PM
Subject: Re: [AFMUG] Lake level monitoring
Still well helps keep it more confined and precise... except in storm
well where turbulence wreaks havoc on it. Shake rattle and roll...
Jaime Solorza
On Feb 17, 2018 1:22 PM, <[email protected]> wrote:
I have used submersible pressure on municipal water tank telemetry
many times.
I guess it would work equally well in a lake.
.433 psi per foot.
From:Jaime Solorza
Sent: Saturday, February 17, 2018 1:10 PM
To:Animal Farm
Subject: Re: [AFMUG] Lake level monitoring
You could use a stilling well with ultrasonic, or a submersible
pressure, you could do a capacitance probe
Jaime Solorza
On Feb 17, 2018 9:12 AM, "Mitch Koep" <[email protected]> wrote:
I saw a system that used the same system for Water tower level
measuring
Installed a screened culvert vertical, about two feet off the bottom
to stop
wave action and device float inside the culvert and a PLC controller
with a radio link
It seemed to work very well
You might want to check and see what is used for sewer ponds as well
Mitch
On 2/16/2018 3:51 PM, Roland Houin wrote:
I have a customer needing to monitor lake levels
need accurate method (gps hopefully) to measure level above msl.
Anybody have any suggestions?
Roland Houin
Fourway.Net
