Re: [AFMUG] Lake level monitoring

[Roland Houin]

I have a pressure sensor coming. will try connecting it to a sitemonitor..   Roland   > I have used submersible pressure on municipal water tank telemetry many times. I guess it would work equally well in a lake. .433 psi per foot. From: Jaime Solorza Sent: Saturday, February 17, 2018 1:10 PM To: Animal Farm Subject: Re: [AFMUG] Lake level monitoring You could use a stilling well with ultrasonic, or a submersible pressure, you could do a capacitance probe Jaime Solorza On Feb 17, 2018 9:12 AM, "Mitch Koep" <af...@abwisp.com> wrote: I saw a system that used the same system for Water tower level measuring Installed a screened culvert vertical, about two feet off the bottom to stop wave action and device float inside the culvert and a PLC controller with a radio link It seemed to work very well You might want to check and see what is used for sewer ponds as well Mitch On 2/16/2018 3:51 PM, Roland Houin wrote: I have a customer needing to monitor lake levels need accurate method (gps hopefully) to measure level above msl. Anybody have any suggestions? Roland Houin Fourway.Net <