so if im getting the right feel, here, I CAN trust these spec sheets? a 30
is actually 30 and not 90? FB is real?
Ive had two in play on EPMP1000 for some time but i keep pulling them and
moving them elsewhere because of changes, so Ive never had one up long
enough to see. I have use case for narrower patterns and more APs at some
sites because the uplinks are getting more interference than id prefer, my
only other option is to add the secondary antenna on the 2000, im not a fan
of adding windload with no net capacity gain

On Wed, Apr 11, 2018 at 9:57 AM, Steve Jones <thatoneguyst...@gmail.com>
wrote:

> we have a substantial garbage dump
>
>
> On Wed, Apr 11, 2018 at 9:08 AM, Jaime Solorza <losguyswirel...@gmail.com>
> wrote:
>
>> There's mountains near Steve's WISP footprint?
>>
>> Jaime Solorza
>>
>> On Wed, Apr 11, 2018, 7:45 AM Mike Hammett <af...@ics-il.net> wrote:
>>
>>> You have that the other way around. A horn would be ideal in a mountain
>>> area.
>>>
>>>
>>>
>>> -----
>>> Mike Hammett
>>> Intelligent Computing Solutions <http://www.ics-il.com/>
>>> <https://www.facebook.com/ICSIL>
>>> <https://plus.google.com/+IntelligentComputingSolutionsDeKalb>
>>> <https://www.linkedin.com/company/intelligent-computing-solutions>
>>> <https://twitter.com/ICSIL>
>>> Midwest Internet Exchange <http://www.midwest-ix.com/>
>>> <https://www.facebook.com/mdwestix>
>>> <https://www.linkedin.com/company/midwest-internet-exchange>
>>> <https://twitter.com/mdwestix>
>>> The Brothers WISP <http://www.thebrotherswisp.com/>
>>> <https://www.facebook.com/thebrotherswisp>
>>>
>>>
>>> <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg>
>>> ------------------------------
>>> *From: *"Sean Heskett" <af...@zirkel.us>
>>> *To: *af@afmug.com
>>> *Sent: *Tuesday, April 10, 2018 10:49:19 PM
>>> *Subject: *Re: [AFMUG] Rfelements
>>>
>>> I Totally agree with josh.
>>>
>>> They have a specific purpose so if you can deploy within those
>>> parameters they are great.
>>>
>>> Unfortunately our area isn’t conducive to that type of deployment
>>> because of terrain.  In the mountains you need antennas with a wider
>>> vertical beam because your towers are on mtn peaks and some clients are
>>> same height as the tower and other clients are on the valley floor.  It’s
>>> hard to use a spot beam to cover all that.
>>>
>>> In the Midwest or other flat areas I could see them being useful to spot
>>> beam the population centers.
>>>
>>> -Sean
>>>
>>>
>>> On Tue, Apr 10, 2018 at 8:29 PM Josh Reynolds <j...@kyneticwifi.com>
>>> wrote:
>>>
>>>> They are great for stuff like 30/40Mhz wide, gps sync, put 4-6 on a
>>>> pole in a subdivision  or on a tower leg kinda thing.
>>>>
>>>>
>>>> If anybody thought they were for something else (ie long range), they
>>>> didn't read the data sheets.
>>>>
>>>> Lightweight, low size, low wind load, perfectly circular pattern -
>>>> great spot beams. Good F/B ratio.
>>>>
>>>> On Tue, Apr 10, 2018, 9:12 PM Robert <i...@avantwireless.com> wrote:
>>>>
>>>>> I recently did a couple of tests with RF horns.   I was hoping for a
>>>>> lot
>>>>> and was disappointed.   I was hoping that they could be colocated
>>>>> closer than regular sectors that I use and the crosstalk signal levels
>>>>> were just about the same as the shielded sectors.   As far as the
>>>>> signals at the CPE's they were pretty good but not amazingly better for
>>>>> as small as the target area got reduced to.
>>>>>
>>>>> On 4/10/18 6:43 PM, Steve Jones wrote:
>>>>> > Can i get some non fanboy real world on these guys? Btw, i hate
>>>>> facebook
>>>>> > groups almost as much as dslreports or the ubnt forums, this is
>>>>> > literally the only place to get legitimate product info.
>>>>>
>>>>
>>>
>

Reply via email to