They are obviously aligned. From: Mathew Howard Sent: Wednesday, April 25, 2018 6:29 PM To: af Subject: Re: [AFMUG] Alignment tips for AF11Fx
Nothing at all on the other side, or just weak? If it's not showing anything at all, it must not actually be linking, in which case it could be something configured wrong... like maybe a type in the key, or one of the frequencies is entered wrong. If all the config matches, the first thing I'd check would be the duplexor... but it sounds like you're already checking that. On Wed, Apr 25, 2018 at 6:44 PM, Jaime Solorza <[email protected]> wrote: so we got a -53dBm on one end and nothing on the other end? aligned and realigned....having the other side check duplexor is 4 and 2 on their side because its 2 and 4 on my side.... i downloaded the manual...guess I will have to read it... this is a 9.3 mile link,,,,I have aligned 11GHz up to 23 miles but with voltmeter on 110 ft tower was easier. Help Mr. wizard Jaime Solorza Wireless Systems Architect 915-861-1390 On Sun, Apr 22, 2018 at 8:55 PM, Sean Heskett <[email protected]> wrote: Oh yeah sorry. Mimosa has that feature and the OP was about the UBNT radio. My bad On Sun, Apr 22, 2018 at 6:24 PM Adair Winter <[email protected]> wrote: Exactly. On Sun, Apr 22, 2018, 8:22 PM Mathew Howard <[email protected]> wrote: Umm... No. That's the Mimosa B11 that has that feature, as well as the newer Ubuntu 5ghz AC radios, but as far as I know, the af11 has nothing of the sort. On Sun, Apr 22, 2018, 8:09 PM Adair Winter <[email protected]> wrote: They do? That's news to me. On Sun, Apr 22, 2018, 6:50 PM Sean Heskett <[email protected]> wrote: The units have a 2.4ghz Wi-Fi convection for configuring and aiming. You’ll probably want to turn it off when you are done. -Sean On Sun, Apr 22, 2018 at 1:08 PM Jaime Solorza <[email protected]> wrote: So no voltmeter alignment option on AirFiber 11FX? That's how I align Dragonwave, Siklu and Bridgewave. ...going to have to set up WiFi hotspots at two locations and use tablet on two towers to align antennas....no other equipment there presently.... Jaime Solorza On Sun, Apr 22, 2018, 1:37 PM Jaime Solorza <[email protected]> wrote: We reserved bobcat with 2 ft. scoop and arranged for cement trucks to pour concrete in tower base pits week before we went to Artesia for last Mobday. Ended with this and cement mixer since no trucks available!!! So instead of two tower base erections on Monday, we did second one on Tuesday!!! Jaime Solorza On Sun, Apr 22, 2018, 11:37 AM Jaime Solorza <[email protected]> wrote: Blew my hair off along with hard hat..... Jaime Solorza On Sun, Apr 22, 2018, 11:31 AM Bill Prince <[email protected]> wrote: Good for both of you! I've been on towers when the wind gets too high, and it is more dangerous than you tend to think. Everything, and I mean everything, gets more difficult. bp <part15sbs{at}gmail{dot}com> On 4/22/2018 9:49 AM, Jaime Solorza wrote: > Ok...I will do that when we go back...winds will be up to 20mph all > week...at 25 they get us off the roof and my Comtrain certified > assistant refused to let me climb!!!! > > Jaime Solorza
