Definitely link them on the bench first. We did not have any issues linking them up
On Wed, Apr 25, 2018 at 6:29 PM, Mathew Howard <[email protected]> wrote: > Nothing at all on the other side, or just weak? If it's not showing > anything at all, it must not actually be linking, in which case it could be > something configured wrong... like maybe a type in the key, or one of the > frequencies is entered wrong. > > If all the config matches, the first thing I'd check would be the > duplexor... but it sounds like you're already checking that. > > On Wed, Apr 25, 2018 at 6:44 PM, Jaime Solorza <[email protected]> > wrote: > >> so we got a -53dBm on one end and nothing on the other end? aligned and >> realigned....having the other side check duplexor is 4 and 2 on their side >> because its 2 and 4 on my side.... >> i downloaded the manual...guess I will have to read it... this is a 9.3 >> mile link,,,,I have aligned 11GHz up to 23 miles but with voltmeter on 110 >> ft tower was easier. >> Help Mr. wizard >> >> Jaime Solorza >> Wireless Systems Architect >> 915-861-1390 >> >> On Sun, Apr 22, 2018 at 8:55 PM, Sean Heskett <[email protected]> wrote: >> >>> Oh yeah sorry. Mimosa has that feature and the OP was about the UBNT >>> radio. >>> >>> My bad >>> >>> On Sun, Apr 22, 2018 at 6:24 PM Adair Winter < >>> [email protected]> wrote: >>> >>>> Exactly. >>>> >>>> On Sun, Apr 22, 2018, 8:22 PM Mathew Howard <[email protected]> >>>> wrote: >>>> >>>>> Umm... No. >>>>> That's the Mimosa B11 that has that feature, as well as the newer >>>>> Ubuntu 5ghz AC radios, but as far as I know, the af11 has nothing of the >>>>> sort. >>>>> >>>>> On Sun, Apr 22, 2018, 8:09 PM Adair Winter < >>>>> [email protected]> wrote: >>>>> >>>> They do? That's news to me. >>>>>> >>>>>> On Sun, Apr 22, 2018, 6:50 PM Sean Heskett <[email protected]> wrote: >>>>>> >>>>> The units have a 2.4ghz Wi-Fi convection for configuring and aiming. >>>>>>> You’ll probably want to turn it off when you are done. >>>>>>> >>>>>>> -Sean >>>>>>> >>>>>>> >>>>>>> On Sun, Apr 22, 2018 at 1:08 PM Jaime Solorza < >>>>>>> [email protected]> wrote: >>>>>>> >>>>>>>> So no voltmeter alignment option on AirFiber 11FX? That's how I >>>>>>>> align Dragonwave, Siklu and Bridgewave. ...going to have to set up WiFi >>>>>>>> hotspots at two locations and use tablet on two towers to align >>>>>>>> antennas....no other equipment there presently.... >>>>>>>> >>>>>>>> >>>>>>>> Jaime Solorza >>>>>>>> >>>>>>>> On Sun, Apr 22, 2018, 1:37 PM Jaime Solorza < >>>>>>>> [email protected]> wrote: >>>>>>>> >>>>>>>>> We reserved bobcat with 2 ft. scoop and >>>>>>>>> arranged for cement trucks to pour concrete in tower base pits >>>>>>>>> week before we went to Artesia for last Mobday. Ended with this and >>>>>>>>> cement >>>>>>>>> mixer since no trucks available!!! So instead of two tower base >>>>>>>>> erections >>>>>>>>> on Monday, we did second one on Tuesday!!! >>>>>>>>> Jaime Solorza >>>>>>>>> >>>>>>>>> On Sun, Apr 22, 2018, 11:37 AM Jaime Solorza < >>>>>>>>> [email protected]> wrote: >>>>>>>>> >>>>>>>>>> Blew my hair off along with hard hat..... >>>>>>>>>> >>>>>>>>>> Jaime Solorza >>>>>>>>>> >>>>>>>>>> On Sun, Apr 22, 2018, 11:31 AM Bill Prince <[email protected]> >>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>>> Good for both of you! I've been on towers when the wind gets too >>>>>>>>>>> high, >>>>>>>>>>> and it is more dangerous than you tend to think. Everything, and >>>>>>>>>>> I mean >>>>>>>>>>> everything, gets more difficult. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> bp >>>>>>>>>>> <part15sbs{at}gmail{dot}com> >>>>>>>>>>> >>>>>>>>>>> On 4/22/2018 9:49 AM, Jaime Solorza wrote: >>>>>>>>>>> > Ok...I will do that when we go back...winds will be up to >>>>>>>>>>> 20mph all >>>>>>>>>>> > week...at 25 they get us off the roof and my Comtrain >>>>>>>>>>> certified >>>>>>>>>>> > assistant refused to let me climb!!!! >>>>>>>>>>> > >>>>>>>>>>> > Jaime Solorza >>>>>>>>>>> >>>>>>>>>> >> >
