I'll give that a whirl, thanks everyone. Backup plan will be Chuck's PVC/spray foam idea.
On Tuesday, May 15, 2018, TJ Trout <[email protected]> wrote: > Yes, we use unistrut for various tower mounts (home made) they defiantly > can hold a mast with plenty of strength > > On Tue, May 15, 2018 at 5:04 PM, <[email protected]> wrote: > >> Stick a piece of PVC down the chimney and use spray foam to hold it in >> place. >> >> *From:* Jason McKemie >> *Sent:* Tuesday, May 15, 2018 5:28 PM >> *To:* [email protected] >> *Subject:* Re: [AFMUG] Attaching pole to Chimney >> >> Do the unistrut conduit clamps hold the conduit tightly enough to mount >> it vertically? I thought they were intended for horizontal runs. >> >> On Tuesday, May 15, 2018, Sam Lambie <[email protected]> wrote: >> >>> Unistrut, clamps and EMT. Done >>> >>> On Tue, May 15, 2018 at 2:46 PM, Jason McKemie < >>> [email protected]> wrote: >>> >>>> It's just a wood box covered in vinyl. >>>> >>>> On Tue, May 15, 2018 at 3:08 PM, Josh Luthman < >>>> [email protected]> wrote: >>>> >>>>> The chimney has vinyl? I assume it's brick behind it? >>>>> >>>>> If you have to get it from the local hardware store, go there and see >>>>> what all can work. I'd probably look for the best tool rather than limit >>>>> myself to that one store, though. >>>>> >>>>> >>>>> Josh Luthman >>>>> Office: 937-552-2340 >>>>> Direct: 937-552-2343 >>>>> 1100 Wayne St >>>>> <https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373&entry=gmail&source=g> >>>>> Suite 1337 >>>>> <https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373&entry=gmail&source=g> >>>>> Troy, OH 45373 >>>>> <https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373&entry=gmail&source=g> >>>>> >>>>> On Tue, May 15, 2018 at 3:07 PM, Jason McKemie < >>>>> [email protected]> wrote: >>>>> >>>>>> Anyone have any advice as to what hardware I can use to attach a 6' >>>>>> section of 1.5" emt to a chimney? It's the vinyl siding covered type. I >>>>>> was >>>>>> thinking of just drilling it and running lags straight through, but a >>>>>> bracket of some type, possibly utilizing pipe clamps, would be preferred. >>>>>> I'll need to source it from a local hardware store. >>>>> >>>>> >>>>> >>>> >>> >>> >>> >>> -- >>> -- >>> *Sam Lambie* >>> Taosnet Wireless Tech. >>> 575-758-7598 Office >>> www.Taosnet.com <http://www.newmex.com> >>> >> >
