Well maybe he knew something about spray foam that I didn't :P
------ Original Message ------
From: "Bill Prince" <[email protected]>
To: [email protected]
Sent: 5/16/2018 11:13:45 AM
Subject: Re: [AFMUG] Attaching pole to Chimney
Chucks tongue was so far into his cheek with that statement, I could
see it from California.
;-)
bp
<part15sbs{at}gmail{dot}com>
On 5/16/2018 7:04 AM, Adam Moffett wrote:
I'm unclear on whether that's a serious suggestion.
------ Original Message ------
From: "Jason McKemie" <[email protected]>
To: "[email protected]" <mailto:[email protected]> <[email protected]>
Sent: 5/15/2018 10:52:42 PM
Subject: Re: [AFMUG] Attaching pole to Chimney
I'll give that a whirl, thanks everyone. Backup plan will be Chuck's
PVC/spray foam idea.
On Tuesday, May 15, 2018, TJ Trout <[email protected]> wrote:
Yes, we use unistrut for various tower mounts (home made) they
defiantly can hold a mast with plenty of strength
On Tue, May 15, 2018 at 5:04 PM, <[email protected]> wrote:
Stick a piece of PVC down the chimney and use spray foam to hold it
in place.
From:Jason McKemie
Sent: Tuesday, May 15, 2018 5:28 PM
To:[email protected]
Subject: Re: [AFMUG] Attaching pole to Chimney
Do the unistrut conduit clamps hold the conduit tightly enough to
mount it vertically? I thought they were intended for horizontal
runs.
On Tuesday, May 15, 2018, Sam Lambie <[email protected]> wrote:
Unistrut, clamps and EMT. Done
On Tue, May 15, 2018 at 2:46 PM, Jason McKemie
<[email protected]> wrote:
It's just a wood box covered in vinyl.
On Tue, May 15, 2018 at 3:08 PM, Josh Luthman
<[email protected]> wrote:
The chimney has vinyl? I assume it's brick behind it?
If you have to get it from the local hardware store, go there
and see what all can work. I'd probably look for the best tool
rather than limit myself to that one store, though.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
<https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373&entry=gmail&source=g>
Suite 1337
<https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373&entry=gmail&source=g>
Troy, OH 45373
<https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373&entry=gmail&source=g>
On Tue, May 15, 2018 at 3:07 PM, Jason McKemie
<[email protected]> wrote:
Anyone have any advice as to what hardware I can use to attach
a 6' section of 1.5" emt to a chimney? It's the vinyl siding
covered type. I was thinking of just drilling it and running
lags straight through, but a bracket of some type, possibly
utilizing pipe clamps, would be preferred. I'll need to source
it from a local hardware store.
--
--
Sam Lambie
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com <http://www.newmex.com>
