I'm going to go with it is probably not. On Wednesday, May 16, 2018, Adam Moffett <[email protected]> wrote:
> I'm unclear on whether that's a serious suggestion. > > > ------ Original Message ------ > From: "Jason McKemie" <[email protected]> > To: "[email protected]" <[email protected]> > Sent: 5/15/2018 10:52:42 PM > Subject: Re: [AFMUG] Attaching pole to Chimney > > I'll give that a whirl, thanks everyone. Backup plan will be Chuck's > PVC/spray foam idea. > > On Tuesday, May 15, 2018, TJ Trout <[email protected]> wrote: > >> Yes, we use unistrut for various tower mounts (home made) they defiantly >> can hold a mast with plenty of strength >> >> On Tue, May 15, 2018 at 5:04 PM, <[email protected]> wrote: >> >>> Stick a piece of PVC down the chimney and use spray foam to hold it in >>> place. >>> >>> *From:* Jason McKemie >>> *Sent:* Tuesday, May 15, 2018 5:28 PM >>> *To:* [email protected] >>> *Subject:* Re: [AFMUG] Attaching pole to Chimney >>> >>> Do the unistrut conduit clamps hold the conduit tightly enough to mount >>> it vertically? I thought they were intended for horizontal runs. >>> >>> On Tuesday, May 15, 2018, Sam Lambie <[email protected]> wrote: >>> >>>> Unistrut, clamps and EMT. Done >>>> >>>> On Tue, May 15, 2018 at 2:46 PM, Jason McKemie < >>>> [email protected]> wrote: >>>> >>>>> It's just a wood box covered in vinyl. >>>>> >>>>> On Tue, May 15, 2018 at 3:08 PM, Josh Luthman < >>>>> [email protected]> wrote: >>>>> >>>>>> The chimney has vinyl? I assume it's brick behind it? >>>>>> >>>>>> If you have to get it from the local hardware store, go there and see >>>>>> what all can work. I'd probably look for the best tool rather than limit >>>>>> myself to that one store, though. >>>>>> >>>>>> >>>>>> Josh Luthman >>>>>> Office: 937-552-2340 >>>>>> Direct: 937-552-2343 >>>>>> 1100 Wayne St >>>>>> <https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373&entry=gmail&source=g> >>>>>> Suite 1337 >>>>>> <https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373&entry=gmail&source=g> >>>>>> Troy, OH 45373 >>>>>> <https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373&entry=gmail&source=g> >>>>>> >>>>>> On Tue, May 15, 2018 at 3:07 PM, Jason McKemie < >>>>>> [email protected]> wrote: >>>>>> >>>>>>> Anyone have any advice as to what hardware I can use to attach a 6' >>>>>>> section of 1.5" emt to a chimney? It's the vinyl siding covered type. I >>>>>>> was >>>>>>> thinking of just drilling it and running lags straight through, but a >>>>>>> bracket of some type, possibly utilizing pipe clamps, would be >>>>>>> preferred. >>>>>>> I'll need to source it from a local hardware store. >>>>>> >>>>>> >>>>>> >>>>> >>>> >>>> >>>> >>>> -- >>>> -- >>>> *Sam Lambie* >>>> Taosnet Wireless Tech. >>>> 575-758-7598 Office >>>> www.Taosnet.com <http://www.newmex.com> >>>> >>> >>
