So long as they dont use pine logs should be ok :)
On 05/15/2018 07:04 PM, [email protected] wrote:
Stick a piece of PVC down the chimney and use spray foam to hold it in
place.
*From:* Jason McKemie
*Sent:* Tuesday, May 15, 2018 5:28 PM
*To:* [email protected]
*Subject:* Re: [AFMUG] Attaching pole to Chimney
Do the unistrut conduit clamps hold the conduit tightly enough to
mount it vertically? I thought they were intended for horizontal runs.
On Tuesday, May 15, 2018, Sam Lambie <[email protected]> wrote:
Unistrut, clamps and EMT. Done
On Tue, May 15, 2018 at 2:46 PM, Jason McKemie
<[email protected]> wrote:
It's just a wood box covered in vinyl.
On Tue, May 15, 2018 at 3:08 PM, Josh Luthman
<[email protected]> wrote:
The chimney has vinyl? I assume it's brick behind it?
If you have to get it from the local hardware store, go
there and see what all can work. I'd probably look for
the best tool rather than limit myself to that one store,
though.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
<https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373&entry=gmail&source=g>
Suite 1337
<https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373&entry=gmail&source=g>
Troy, OH 45373
<https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373&entry=gmail&source=g>
On Tue, May 15, 2018 at 3:07 PM, Jason McKemie
<[email protected]> wrote:
Anyone have any advice as to what hardware I can use
to attach a 6' section of 1.5" emt to a chimney? It's
the vinyl siding covered type. I was thinking of just
drilling it and running lags straight through, but a
bracket of some type, possibly utilizing pipe clamps,
would be preferred. I'll need to source it from a
local hardware store.
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com <http://www.newmex.com>
--
