Not that I've tried on our GTV6 but my idea would be to source two pieces of
fuel resistant hose, one with an ID to fit the smaller and the other to fit
the ID of the larger. Then hope the OD of the smaller will fit into the ID
of the larger...
Is that hose quite short? If not and it were long enough, perhaps a reducing
pipe so that there'd be a larger ID hose between the filler pipe and the
reducer and a smaller ID hose between the reducer and gas tank. Like an
exhaust reducing pipe.
http://www.summitracing.com/search/brand/Dynomax-Performance/Product-Line/Walker-Universal-Exhaust-Connectors-and-Reducers/
Eric Russell
Mebane, NC
http://home.mebtel.net/~ejrussell
----- Original Message -----
From: "alfa-digest"
Date: Mon, 21 Feb 2011 14:03:59 -0500 (EST)
From: [email protected]
Subject: [alfa] GTV-6 Gas filler pipe to tank neck connector
Just wondering if anyone has come up with a solution to the deterioration
of the rubber connector between the gas filler pipe and the gas tank neck
on
the GTV-6?
The main issue is that the two pipes are significantly different is OD.
The
filler pipe is approximately 2 1/4: OD, and the gas tank neck is
approximately 1 15/16" OD.
Bruce Sharer
Raleigh, Nc
--
to be removed from alfa, see http://www.digest.net/bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]
