At Wed, 12 Jun 2002 16:19:57 +0200, Niklas Werner wrote: > > Am Wednesday, 12. June 2002 16:13, wurde geschrieben: > > At Wed, 12 Jun 2002 23:10:19 +0900, > > > > Patrick Shirkey wrote: > > > Takashi Iwai wrote: > > > > it's on cvs. please give a try. > > > > btw, now descriptor proc was removed (one can use lsusb anyway). > > > > instead you'll see formats supported on each stream. > > > OK, in stream0 now my emi26 is recognised as being capable of 6 outs @ > 44.1 or 48 k and 2 out @ 96 kHz, but still I only get /proc/asound/card0/: > id pcm0p pcm0c stream0
it's ok. a stream can support different formats and channels. if you find "Channels: 6" in stream0 proc file, then it means that the pcm device 'hw:0,0' (or hw:X,0 where X is the card number) can accept 6 channels playback/capture. if so, you can just feed 6-channels interleaved data to the device. well, this means also, that you have to access all 6 channels at the same time. Takashi _______________________________________________________________ Sponsored by: ThinkGeek at http://www.ThinkGeek.com/ _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
