> > OK, in stream0 now my emi26 is recognised as being capable of 6 outs
> > @ 44.1 or 48 k and 2 out @ 96 kHz, but still I only get
> > /proc/asound/card0/: id pcm0p pcm0c stream0
>
> it's ok. a stream can support different formats and channels.
> if you find "Channels: 6" in stream0 proc file, then it means that the
> pcm device 'hw:0,0' (or hw:X,0 where X is the card number) can accept
> 6 channels playback/capture. if so, you can just feed 6-channels
> interleaved data to the device.
> well, this means also, that you have to access all 6 channels at the
> same time.
bugger!
Well, OK, at least that gives me an idea... but the much discussed
("multiple cards"-thread on jackit-devel) .asoundrc-fiddling for getting
more than one app to do the playback should work ok then, shouldn't it?
I'll give it a try :-)
Have fun*
Niklas
_______________________________________________________________
Sponsored by:
ThinkGeek at http://www.ThinkGeek.com/
_______________________________________________
Alsa-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
