Patrick Shirkey wrote: > Patrick Shirkey wrote: > >> >> i have been testing the sound and I am getting playback although at >> this point I can get sound out of hw:2,0 and hw:2,2 they are both the >> left channels. The sound is scratchy but it is there :) >> > > The sound is actually coming through output 2 and 4 on the sound card > even though I'm using hw:2,0 or hw:2,2. >
When I use the first two pcm devices the sound is sent through output 2 on the card and when I use the third the sound is sent through output 4. I have also tested capture and the card is not working with that yet. It will attempt to record for a few seconds but will not write to a file or produce any noise either with direct monitoring enabled or not. Also recording locks the mouse until either it has finished or is ctrl+c'd. -- Patrick Shirkey - Boost Hardware Ltd. For the discerning hardware connoisseur Http://www.boosthardware.com Http://www.boosthardware.com/LAU/guide/ ======================================== _______________________________________________________________ Sponsored by: ThinkGeek at http://www.ThinkGeek.com/ _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
