Thomas, Will this work cover the HDSP 9652 also, or is that different and has to wait?
Thanks, Mark > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Thomas > Charbonnel > Sent: Sunday, March 02, 2003 3:43 PM > To: Paul Davis > Cc: alsa-devel > Subject: [PATCH] HDSP rms and peak registers correct offsets (was: > Re:[Alsa-devel] hdsp driver) > > > On Sun, 2003-03-02 at 21:24, Thomas Charbonnel wrote: > > On Thu, 2003-02-27 at 19:43, Paul Davis wrote: > > > i haven't had time today to get the patch for the hdsp ready. however, > > > the new source works here (i have some CVS sync issues). i'll get it > > > out to the list on monday (i'm gone for the weekend). > > > > > Did you sort out the rms register issue ? I'm currently implementing the > > metering part of HDSPMixer and the rms values returned are obviously > > bogus. > > > > Thomas > > Ok, I sorted it out myself, the offsets for the rms and peak registers > were wrong. Sorry Paul, I could have seen this much earlier if I had > done more extensive tests: I kept on testing inputs 1 and 2 while the > input rms offset pointed on input 3... :-\ > > The correct offsets can be found in the attached patch. > > Thomas > > ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
