On Thu, Oct 23, 2003 at 06:47:35PM +0200, Takashi Iwai wrote: > > thanks for the patch. now applied to cvs. > > > Are the specs for the VT8235 available anywhere? > > not in public i know of... >
Ah, too bad. > Takashi Any ideas on the problem with me not being able to record if the Input Source is set to Mic? arecord records when it's set to Line (as it was forced, before), and does playback as well.. When it's set to Mic, I get no playback from a Mic (and I'm not wanting to hook up powered output in to the jack when it's set to Mic), but I suspect it's still Line-in, and the register being twiddled isn't right, or needs some more setup. arecord waits a bit, then gives the error I mentioned: arecord: pcm_read:1110: read error: Input/output error dmesg says nothing :/ If nothing else, the settings do have to do with the actual capture sources (idx 0 vs. idx 1), because when I set idx 0 to mic, it can't record, but idx 1 can, and when I set idx 1 to mic, it can't record, but idx 0 can. When both are set to mic, neither can record. Any recommendations for stuff to try would be apreciated, as I really would like to be able to record without getting another sound card :/ -- Zinx Verituse ------------------------------------------------------- This SF.net email is sponsored by: The SF.net Donation Program. Do you like what SourceForge.net is doing for the Open Source Community? Make a contribution, and help us add new features and functionality. Click here: http://sourceforge.net/donate/ _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
