At Thu, 23 Oct 2003 20:05:02 -0500, Zinx Verituse wrote: > > On Thu, Oct 23, 2003 at 06:47:35PM +0200, Takashi Iwai wrote: > > > > thanks for the patch. now applied to cvs. > > > > > Are the specs for the VT8235 available anywhere? > > > > not in public i know of... > > > > Ah, too bad. > > > Takashi > > Any ideas on the problem with me not being able to record > if the Input Source is set to Mic? > > arecord records when it's set to Line (as it was forced, before), > and does playback as well.. > > When it's set to Mic, I get no playback from a Mic (and I'm not > wanting to hook up powered output in to the jack when it's set > to Mic), but I suspect it's still Line-in, and the register > being twiddled isn't right, or needs some more setup. > > arecord waits a bit, then gives the error I mentioned: > arecord: pcm_read:1110: read error: Input/output error > > dmesg says nothing :/ > > If nothing else, the settings do have to do with the actual > capture sources (idx 0 vs. idx 1), because when I set idx 0 > to mic, it can't record, but idx 1 can, and when I set idx 1 > to mic, it can't record, but idx 0 can. When both are set > to mic, neither can record.
sorry, could you elaborate this? i'm confused. did you try hw:0,0 and hw:0,1, right? Takashi ------------------------------------------------------- This SF.net email is sponsored by: The SF.net Donation Program. Do you like what SourceForge.net is doing for the Open Source Community? Make a contribution, and help us add new features and functionality. Click here: http://sourceforge.net/donate/ _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
