At Mon, 27 Oct 2003 15:35:49 -0600, Zinx Verituse wrote: > > On Mon, Oct 27, 2003 at 11:41:37AM +0100, Takashi Iwai wrote: > > At Sat, 25 Oct 2003 09:31:59 -0500, > > Zinx Verituse wrote: > > > > [snip] > > > > > > I have more to report on this issue: > > > When I was recording with 'Line' selected as the 'Input Source', > > > 'Mic' was the selected recording device, and 'Line' was completely > > > silent. Also, I have noticed that if I'm playing something on > > > hw:0,0, then hw:0,1 fails like recording does. However, if I try > > > to play two things to hw:0,0, it works. And if I try to play > > > something to hw:0,1 while hw:0,0 is closed, it also works. > > > > well, playing hw:0,0 and hw:0,1 is different from capture. > > hw:0,0 is the multi-play device (DXS channels) while hw:0,1 is the > > multi-channel play device for 5.1 outputs. and you cannot access to > > both devices at the same time, anyway. > > > > Might I suggest that it gives device or resource busy, or blocks on > open, then? :) Right now, it's pretending everything is fine, until > you try to actually play something, then it just sits there doing > nothing.
i would set this bugzilla priority to LATER (if any exists :) it's not a critical bug, so the fix will be postponed after 1.0 release. of course, a patch is always welcome :) Takashi ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/ _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel