On Fri, Oct 24, 2003 at 03:59:18PM -0500, Zinx Verituse wrote: > On Fri, Oct 24, 2003 at 03:14:44PM +0200, Takashi Iwai wrote: > > At Thu, 23 Oct 2003 20:05:02 -0500, > > Zinx Verituse wrote: > > > > > > Any ideas on the problem with me not being able to record > > > if the Input Source is set to Mic? > > > > > > arecord records when it's set to Line (as it was forced, before), > > > and does playback as well.. > > > > > > When it's set to Mic, I get no playback from a Mic (and I'm not > > > wanting to hook up powered output in to the jack when it's set > > > to Mic), but I suspect it's still Line-in, and the register > > > being twiddled isn't right, or needs some more setup. > > > > > > arecord waits a bit, then gives the error I mentioned: > > > arecord: pcm_read:1110: read error: Input/output error > > > > > > dmesg says nothing :/ > > > > > > If nothing else, the settings do have to do with the actual > > > capture sources (idx 0 vs. idx 1), because when I set idx 0 > > > to mic, it can't record, but idx 1 can, and when I set idx 1 > > > to mic, it can't record, but idx 0 can. When both are set > > > to mic, neither can record. > > > > sorry, could you elaborate this? i'm confused. > > did you try hw:0,0 and hw:0,1, right? > > > > Yeah, hw:0,0 fails when Input Source idx 0 is set to Mic, > and hw:0,1 fails when Input Source idx 1 is set to Mic. > > > > > Takashi > > >
I have more to report on this issue: When I was recording with 'Line' selected as the 'Input Source', 'Mic' was the selected recording device, and 'Line' was completely silent. Also, I have noticed that if I'm playing something on hw:0,0, then hw:0,1 fails like recording does. However, if I try to play two things to hw:0,0, it works. And if I try to play something to hw:0,1 while hw:0,0 is closed, it also works. -- Zinx Verituse ------------------------------------------------------- This SF.net email is sponsored by: The SF.net Donation Program. Do you like what SourceForge.net is doing for the Open Source Community? Make a contribution, and help us add new features and functionality. Click here: http://sourceforge.net/donate/ _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
