The install of driver, lib and utils proceeds without a hitch; I run
alsaconf, which successfully detects the card and configures
/etc/modules.conf; the modules all load without any obvious issues
(nothing suspicious in either the output of dmesg or /var/log/messages -
except for a mention that the card is sharing IRQ 5 with two other
cards.) I open a mixer application and crank up the levels (just before
someone asks!). Everything OK: the modules load perfectly. But - no
sound at all, from any application which I've tried so far. (The native
emu10k1 driver in the 2.4.19 kernel source (built as a module) works
fine.)
go into the first mixer item (master) in alsamixer and press 'm' , this will unmute it (it can be muted even though the volume can be changed,) do the same for 'pcm', and also make sure 'wave' is somewhere around half way up, then try again...
Nehal ------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
