FYI: I have been playing around with different mixer programs and the found that the text-based alsamixer *can* control the output level of the MP3+ using the "speaker 1" control. "Speaker" doesn't do anything, nor does "PCM" or "PCM 1", and there is no "master" or "line in" control.
So it seems that there is some mapping missing between the mixer controls and the actual hardware. Where can I change this mapping? I have also noticed some "clicking" in the sound during MP3 playback - not present on the computer's built-in ESS Maestro soundcard. Any ideas? Thanks > At Thu, 03 Jul 2003 09:49:50 +0200 (METDST), > Clemens Ladisch wrote: > > > > > I compiled with debug, i see these errors: > > > > > > kernel: ALSA sound/usb/usbmixer.c:348: cannot set ctl value: req = > > > 0x4, wValue = 0x201, wIndex = 0xe00, type = 4, data = 0x18/0x0 > > > > The driver tried to set control 14 to the value 24. I don't know if > > this is allowed when the resolution is 48. > > > > Takashi, could you please look in to this? > > this is ok. it's SET_RES call, and the driver was trying to reduce > the resolution to minimum in the loop in get_min_max() function. > > is there any similar message with "req = 0x1" ? this corresponds to > SET_CUR command, which will modify the current value. if this fails, > it's a real problem. > > > Takashi ------------------------------------------------------- This SF.Net email sponsored by: Free pre-built ASP.NET sites including Data Reports, E-commerce, Portals, and Forums are available now. Download today and enter to win an XBOX or Visual Studio .NET. http://aspnet.click-url.com/go/psa00100006ave/direct;at.asp_061203_01/01 _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
