That second point sounds a lot like it's resetting due to power loss when the igniter fires. Have you checked to see if the resistance isn't too low on what you're using?
-Kevin -----Original Message----- From: altusmetrum [mailto:[email protected]] On Behalf Of Tim Navickas Sent: Sunday, April 06, 2014 4:55 PM To: 'Altus Metrum' Subject: [altusmetrum] Telemetrum Problems I seem to be having problems with my telemetrum and am wondering if I am using it correctly. 1. When the rocket is in the vertical position and armed I start up the software and it automatically goes into the monitor mode. All data is green but I cannot close the window without using task manager 2. When the rocket is horizontal position and I want to test fire the igniters I first arm them and then press fire but nothing happens. The software says the igniters are connected. Also, after I press fire the software acts like it is reconnecting to the altimeter.. I have used all this last year with no problems and was wanting to test before a launch next weekend. Any thoughts? Thanks, Tim _______________________________________________ altusmetrum mailing list [email protected] http://lists.gag.com/mailman/listinfo/altusmetrum _______________________________________________ altusmetrum mailing list [email protected] http://lists.gag.com/mailman/listinfo/altusmetrum
