Never mind, I went and found my smart cap, put it on and re-read the link. I don't need pictures. :) thanks for posting the link, and I am squared away. Now to do some work.
If finding o-rings for ex reload in 3 days is the hardest thing I have to do, I am going to have a great launch this weekend... say goodbye to no rocket launch blues.... -----Original Message----- From: Clay & Carly Dunsworth [mailto:[email protected]] Sent: Tuesday, April 08, 2014 10:13 AM To: 'Altus Metrum' Subject: RE: [altusmetrum] Telemetrum = Altos Problems The link is good, but am I the only one that cant see the photos? I want to add a pyro battery to my TM. But not sure what side of the ematch to connect my leads to. As I assume you still connect them to the terminal on the TM? Second issue is I ran the update for 1.3 and my load Maps button doesn't open anything. I think I already have The Rocket Pasture loaded, but next weekend I am going somewhere I don't have loaded. I am moving around this the easy way by must copying my deskops maps folder over to my laptop, but curious if someone else has the same problem. 1.3.2 on debian. Tim, If I am there, you are welcome to use my laptop. But beware, it is a rocket computer that has argonia dirt in it. If you touch it just right the screen falls off or the hard drive may fall out. Clay P.s. My screen aint too bright:) -----Original Message----- From: altusmetrum [mailto:[email protected]] On Behalf Of Jesse Gersenson Sent: Tuesday, April 08, 2014 5:43 AM To: [email protected] Subject: Re: [altusmetrum] Telemetrum Problems Here are instructions for adding a separate pyro battery. I had a similar problem with my TeleMini resetting during fire and this worked around solved the problem: http://altusmetrum.org/Documents/SeparatePyroBattery/ On 04/08/2014 12:30 PM, Kevin Trojanowski wrote: > Do you have another battery you can try, to eliminate that as a possible > cause? > > -Kevin > > -----Original Message----- > From: altusmetrum [mailto:[email protected]] On Behalf Of > Tim Navickas > Sent: Monday, April 07, 2014 8:41 PM > To: 'Bdale Garbee'; 'Altus Metrum' > Subject: Re: [altusmetrum] Telemetrum Problems > > Further information. > > 1. Uninstalled the software and installed version 1.2.1 all the windows work > properly. I have a Telemetrum v1.0 unit. > > 2. I still cannot fire an igniter. I have tried several different one and > every different types..When I arm it then fires it says connecting to COM3. > > I have always flown this as a data logger and tracker but this will be the > first time I have used it for dual deploy. The battery voltage is reading > 4.0 volts and the igniters read 3.5 Volts. The resistance is 1.7 ohms for > each igniter. I did make the mod to the battery removing the board as > suggested. I would like to fly this weekend at KLOUDBURST but am afraid to > rely on this altimeter if I cannot ground test. > > Does anyone have any suggestions for me, I getting desperate. > > Thanks, > Tim > > -----Original Message----- > From: Bdale Garbee [mailto:[email protected]] > Sent: Monday, April 07, 2014 1:18 PM > To: Tim Navickas; 'Altus Metrum' > Subject: Re: [altusmetrum] Telemetrum Problems > > Tim Navickas <[email protected]> writes: > >> 1. When the rocket is in the vertical position and armed I start up >> the software and it automatically goes into the monitor mode. All data >> is green but I cannot close the window without using task manager > Not being able to close the monitor window seems really odd / broken. > >> 2. When the rocket is horizontal position and I want to test fire the >> igniters I first arm them and then press fire but nothing happens. >> The software says the igniters are connected. Also, after I press >> fire the software acts like it is reconnecting to the altimeter.. > Does the TeleMetrum beep at you like it's restarting? If not, you're not > having a problem with the flight computer, you're having a problem with the > ground station software. Given the oddity of not being able to close the > monitor window, sure seems like something isn't happy between the altosui > application, the Java runtime, and the operating system. > > I personally know too little about Windows to be much help here. > >> I have used all this last year with no problems and was wanting to >> test before a launch next weekend. Any thoughts? > Definitely sounds like something got updated on your computer in the interim > that our software isn't happy about. > > Bdale > > _______________________________________________ > altusmetrum mailing list > [email protected] > http://lists.gag.com/mailman/listinfo/altusmetrum > > _______________________________________________ > altusmetrum mailing list > [email protected] > http://lists.gag.com/mailman/listinfo/altusmetrum _______________________________________________ altusmetrum mailing list [email protected] http://lists.gag.com/mailman/listinfo/altusmetrum _______________________________________________ altusmetrum mailing list [email protected] http://lists.gag.com/mailman/listinfo/altusmetrum
