Jan, A number of things.
The hex file you have found may not be one for the Arduino Mega2560. If I remember correctly, the distribution has an appl folder for the atmega2561 and the configuration assembler file https://sourceforge.net/p/amforth/code/HEAD/tree/trunk/appl/atmega2561/atmega256.asm suggests that it was built for an ATmega2561 with an 14.745600MHz crystal and uart1 hosting the AmForth interpreter. I adjusted the AmForth make system (on OSX) to build a custom hex file for the Arduino Mega2560 which uses ATmega2560 chip and a 16MHz crystal. I also put the AmForth interpreter on uart0. The AmForth build system is one of its many strengths, though getting it to work on OS X does require a few extra steps. I used these fuse values for my Arduino Mega2560 > avrdude: safemode: Fuses OK (E:FF, H:99, L:CE) Finally, what hex programmer you use may be important with the Mega2560. I used an avrisp2 compatible programmer and had no problems. However, I can confirm that my usbtiny programmer couldn't program my Mega2560 successfully. Best wishes, Tristan On 15Feb19 14:20, Jan Kromhout wrote: > Tristan, > > Found the hex files for the Mega, but don’t found the fuse values. > Please can you help me out with these. > > Cheers, > > Jan > > > > > Op 15 feb. 2019, om 13:21 heeft Jan Kromhout <krom1...@hotmail.com> het > > volgende geschreven: > > > > Tristan, > > > > Thank. Where to find the hex files for the mega, and what fuse settings you > > have used. > > I wont to play with it this evening. Verry exciting how it works. > > Cheers, > > > > Jan > > > > Verstuurd vanaf mijn iPad > > > >> Op 15 feb. 2019 om 12:45 heeft Tristan Williams <h...@tjnw.co.uk> het > >> volgende geschreven: > >> > >> Jan, > >> > >> There is a link "source" in the text, but below is the url from the > >> link. > >> > >> https://www.mostlymostly.uk/files/source/uart1.forth > >> > >> Tristan > >> > >> > >>> On 15Feb19 11:15, Jan Kromhout via Amforth-devel wrote: > >>> Hi Tristan, > >>> > >>> How can I acces the source, the link shows only an overview! > >>> > >>> Cheers, > >>> > >>> Jan > >>> > >>> Verstuurd vanaf mijn iPad > >>> > >>>> Op 15 feb. 2019 om 09:21 heeft Tristan Williams <h...@tjnw.co.uk> het > >>>> volgende geschreven: > >>>> > >>>> > >>>> > >>>> I've linked (below) some AmForth words I've written to help me use the > >>>> second hardware serial port on an AVR atmega mcu, should there be one. > >>>> > >>>> https://www.mostlymostly.uk/post/2019.02.01/ > >>>> > >>>> > >>>> Tristan > >>>> > >>>> > >>>> > >>>> > >>>> _______________________________________________ > >>>> Amforth-devel mailing list for http://amforth.sf.net/ > >>>> Amforth-devel@lists.sourceforge.net > >>>> https://lists.sourceforge.net/lists/listinfo/amforth-devel > >>> > >>> > >>> > >>> _______________________________________________ > >>> Amforth-devel mailing list for http://amforth.sf.net/ > >>> Amforth-devel@lists.sourceforge.net > >>> https://lists.sourceforge.net/lists/listinfo/amforth-devel > >>> > >> > >> > >> _______________________________________________ > >> Amforth-devel mailing list for http://amforth.sf.net/ > >> Amforth-devel@lists.sourceforge.net > >> https://lists.sourceforge.net/lists/listinfo/amforth-devel > > > > > > _______________________________________________ > > Amforth-devel mailing list for http://amforth.sf.net/ > > Amforth-devel@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/amforth-devel > > > _______________________________________________ > Amforth-devel mailing list for http://amforth.sf.net/ > Amforth-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/amforth-devel _______________________________________________ Amforth-devel mailing list for http://amforth.sf.net/ Amforth-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/amforth-devel
