Jan, My prebuilt hex files for the ARDUINO MEGA 2560 are linked below
https://www.mostlymostly.uk/post/2019.02.16/ Hope this helps and interested to hear how you get on. Best wishes, Tristan On 15Feb19 16:47, Jan Kromhout via Amforth-devel wrote: > Tristan, > > First thanks for the quick response. > Yes I found out the hex file wasn’t working after flashing to the Mega. > My flasher is from Pololu and is working great on my macbook pro and avrdude. > > Is there an possibility to get the hex files from you? > I’m not a star in compiling this kind of things without a good portion of > help. > > My email is krom1109 at hotmail dot com > > With kindly regards, > > Jan > > > > > Op 15 feb. 2019, om 16:38 heeft Tristan Williams <h...@tjnw.co.uk> het > > volgende geschreven: > > > > Jan, > > > > A number of things. > > > > The hex file you have found may not be one for the Arduino > > Mega2560. If I remember correctly, the distribution has an appl folder > > for the atmega2561 and the configuration assembler file > > > > https://sourceforge.net/p/amforth/code/HEAD/tree/trunk/appl/atmega2561/atmega256.asm > > > > suggests that it was built for an ATmega2561 with an 14.745600MHz crystal > > and uart1 > > hosting the AmForth interpreter. > > > > I adjusted the AmForth make system (on OSX) to build a custom hex file > > for the Arduino Mega2560 which uses ATmega2560 chip and a 16MHz > > crystal. I also put the AmForth interpreter on uart0. The AmForth > > build system is one of its many strengths, though getting it to work > > on OS X does require a few extra steps. > > > > I used these fuse values for my Arduino Mega2560 > > > >> avrdude: safemode: Fuses OK (E:FF, H:99, L:CE) > > > > Finally, what hex programmer you use may be important with the Mega2560. I > > used an avrisp2 compatible programmer and had no problems. However, I can > > confirm that my usbtiny programmer couldn't program my Mega2560 > > successfully. > > > > Best wishes, > > Tristan > > > > > > > > > > > > > > > > > > On 15Feb19 14:20, Jan Kromhout wrote: > >> Tristan, > >> > >> Found the hex files for the Mega, but don’t found the fuse values. > >> Please can you help me out with these. > >> > >> Cheers, > >> > >> Jan > >> > >> > >> > >>> Op 15 feb. 2019, om 13:21 heeft Jan Kromhout <krom1...@hotmail.com> het > >>> volgende geschreven: > >>> > >>> Tristan, > >>> > >>> Thank. Where to find the hex files for the mega, and what fuse settings > >>> you have used. > >>> I wont to play with it this evening. Verry exciting how it works. > >>> Cheers, > >>> > >>> Jan > >>> > >>> Verstuurd vanaf mijn iPad > >>> > >>>> Op 15 feb. 2019 om 12:45 heeft Tristan Williams <h...@tjnw.co.uk> het > >>>> volgende geschreven: > >>>> > >>>> Jan, > >>>> > >>>> There is a link "source" in the text, but below is the url from the > >>>> link. > >>>> > >>>> https://www.mostlymostly.uk/files/source/uart1.forth > >>>> > >>>> Tristan > >>>> > >>>> > >>>>> On 15Feb19 11:15, Jan Kromhout via Amforth-devel wrote: > >>>>> Hi Tristan, > >>>>> > >>>>> How can I acces the source, the link shows only an overview! > >>>>> > >>>>> Cheers, > >>>>> > >>>>> Jan > >>>>> > >>>>> Verstuurd vanaf mijn iPad > >>>>> > >>>>>> Op 15 feb. 2019 om 09:21 heeft Tristan Williams <h...@tjnw.co.uk> het > >>>>>> volgende geschreven: > >>>>>> > >>>>>> > >>>>>> > >>>>>> I've linked (below) some AmForth words I've written to help me use the > >>>>>> second hardware serial port on an AVR atmega mcu, should there be one. > >>>>>> > >>>>>> https://www.mostlymostly.uk/post/2019.02.01/ > >>>>>> > >>>>>> > >>>>>> Tristan > >>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> _______________________________________________ > >>>>>> Amforth-devel mailing list for http://amforth.sf.net/ > >>>>>> Amforth-devel@lists.sourceforge.net > >>>>>> https://lists.sourceforge.net/lists/listinfo/amforth-devel > >>>>> > >>>>> > >>>>> > >>>>> _______________________________________________ > >>>>> Amforth-devel mailing list for http://amforth.sf.net/ > >>>>> Amforth-devel@lists.sourceforge.net > >>>>> https://lists.sourceforge.net/lists/listinfo/amforth-devel > >>>>> > >>>> > >>>> > >>>> _______________________________________________ > >>>> Amforth-devel mailing list for http://amforth.sf.net/ > >>>> Amforth-devel@lists.sourceforge.net > >>>> https://lists.sourceforge.net/lists/listinfo/amforth-devel > >>> > >>> > >>> _______________________________________________ > >>> Amforth-devel mailing list for http://amforth.sf.net/ > >>> Amforth-devel@lists.sourceforge.net > >>> https://lists.sourceforge.net/lists/listinfo/amforth-devel > >> > >> > >> _______________________________________________ > >> Amforth-devel mailing list for http://amforth.sf.net/ > >> Amforth-devel@lists.sourceforge.net > >> https://lists.sourceforge.net/lists/listinfo/amforth-devel > > > > > > _______________________________________________ > > Amforth-devel mailing list for http://amforth.sf.net/ > > Amforth-devel@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/amforth-devel > > > > _______________________________________________ > Amforth-devel mailing list for http://amforth.sf.net/ > Amforth-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/amforth-devel _______________________________________________ Amforth-devel mailing list for http://amforth.sf.net/ Amforth-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/amforth-devel