I don't have access to a console in the virtual box and I don't think I can adb from my terminal to the VB installation.
I have to figure out how to boot into console. On May 11, 9:02 am, Androidphan <[email protected]> wrote: > Use adblogcat. > > On May 11, 2:41 pm, Kasuko <[email protected]> wrote: > > > Is there anyway to get thelogcatinformation without access to > > anything. I can't boot into a console. Which seems to mean it probably > > isn't related to the fb. Hmmmm. > > > On May 8, 9:36 pm, Chen Yang <[email protected]> wrote: > > > > would you like to provide thelogcatinformation? it may not be the fb > > > related according to your description. > > > -- > > > Chen > > > > On Sat, May 9, 2009 at 5:17 AM, Kasuko <[email protected]> wrote: > > > > > I am having this exact same issue. When I boot normally or changing > > > > the boot options to vga=778 the screen resizes but stays black. When I > > > > try vesafb or intelfb it does not resize. This makes me suspect that > > > > the framebuffer is being initialized just something is going wrong. I > > > > know vesa fb is installed. I have read and tried every how to. And the > > > > same as FrankieCZ I also ran the prebuilt image and it worked fine. > > > > > Kasuko > > > > > On Apr 27, 12:46 pm, FrankieCZ <[email protected]> wrote: > > > >> Yes, I have copied bzImage for sure. > > > > >> I'm still compiling (now I have another problem during compilation but > > > >> this is probably related to my Linux envinroment (not enough RAM or > > > >> something))... > > > > >> Frank > > > > >> On Apr 27, 6:27 pm, Yi Sun <[email protected]> wrote: > > > > >> > One more question and just a double check --- have you copied > > > >> > bzImage to > > > >> > vendor/asus/eee_701 after you build the kernel and before you build > > > >> > installer_img? > > > > >> > On Mon, Apr 27, 2009 at 2:49 AM, FrankieCZ <[email protected]> > > > >> > wrote: > > > > >> > > I did check of kernel config file, VESA fb. is included in the > > > >> > > kernel > > > >> > > for sure. When I do /proc/fb I cannot see VESA, actually, where > > > >> > > should > > > >> > > I see it? > > > >> > > It seems VESA fb is included but probably not initialized. I have > > > >> > > also > > > >> > > downloaded one Android image (compiled by someone else) and this > > > >> > > image > > > >> > > runs perfectly in VirtualBox (but don't know details about this > > > >> > > image). > > > > >> > > Now, I'm trying to compile everything from scratch (with the > > > >> > > lastest > > > >> > > version of Android from git) and I will see if something > > > >> > > change...it > > > >> > > takes some time to compile it etc. :) > > > > >> > > Frank > > > > >> > > On Apr 27, 12:10 am, Yi Sun <[email protected]> wrote: > > > >> > > > Please also check the content of /proc/fb If u vessfb driver is > > > >> > > > installed coreectly, you should see VESA in that file. The > > > >> > > > surfaceflinger crash is because it can not find /dev/graphics/fb > > > >> > > > during the init process and it is caused by wrong fb driver > > > >> > > > installation and configuration. > > > >> > > > Please do check .config file to make sure u indeed enabled VESA > > > >> > > > fb. > > > >> > > > Even u have already applied patches there are still many other > > > >> > > > things > > > >> > > > can went wrong > > > > >> > > > On Apr 26, 2009, at 3:04 AM, Chen Yang <[email protected]> > > > >> > > > wrote: > > > > >> > > > > oops, have you compiled the kernel with builtin vesafb? > > > >> > > > > it is not there by default. > > > >> > > > > -- > > > >> > > > > Chen > > > > >> > > > > On 4/26/09, FrankieCZ <[email protected]> wrote: > > > > >> > > > >> Unfortunately, still the same. > > > >> > > > >> I removed vesafb, add vga=788, I can boot and see black > > > >> > > > >> screen only > > > >> > > > >> (I'm waiting enough time to be sure that Android GUI will not > > > >> > > > >> appear). > > > >> > > > >> I've tried to change vesafb into intelfb (in cmdline), just if > > > >> > > > >> something will change, but nothing. > > > > >> > > > >> Obviously, there is some problem with SurfaceFlinger / GUI > > > >> > > > >> initialization, maybe because I'm running it under > > > >> > > > >> VirtualBox? Is > > > >> > > > >> there any special FB or video driver to be compiled into the > > > >> > > > >> Kernel? > > > > >> > > > >> Frank > > > > >> > > > >> On Apr 26, 10:24 am, Chen Yang <[email protected]> wrote: > > > >> > > > >>> please remove the vesafb in cmdline and append vga=788 > > > >> > > > >>> and have a try. :) > > > >> > > > >>> -- > > > >> > > > >>> Chen > > > > >> > > > >>> On Sun, Apr 26, 2009 at 3:57 PM, FrankieCZ > > > >> > > > >>> <[email protected]> > > > >> > > > >>> wrote: > > > > >> > > > >>>> Hi, > > > > >> > > > >>>> for booting I'm using these cmdline parameters: > > > > >> > > > >>>> console=tty0 console=ttyS1,115200n8 console=tty0 > > > >> > > > >>>> androidboot.hardware=eee_701 vesafb > > > > >> > > > >>>> (during Kernel compilation, VESAFB drivers in menuconfig > > > >> > > > >>>> were > > > >> > > > >>>> selected. Generally, I've applied all patches provided on > > > >> > > > >>>> the wiki > > > >> > > > >>>> (except those 2 for atl2 driver) > > > > >> > > > >>>> (if I don't specify vga parameter I can boot to console > > > >> > > > >>>> mode and > > > >> > > > >>>> access console via alt+f1, if I specify vga parameter (does > > > >> > > > >>>> not > > > >> > > > >>>> matter, which resolution / bit depth, I cannot access > > > >> > > > >>>> console > > > >> > > > >>>> after) > > > > >> > > > >>>> thelogcatoputput: > > > > >> > > > >>>> I/SurfaceFlinger(2536): SurfaceFlinger is starting > > > >> > > > >>>> I/SurfaceFlinger(2536): SurfaceFlinger's main thread ready > > > >> > > > >>>> to run. > > > >> > > > >>>> Initializing graphics H/W... > > > >> > > > >>>> E/MemoryHeapBase(2536): error opening /dev/pmem: No such > > > >> > > > >>>> file or > > > >> > > > >>>> directory > > > >> > > > >>>> E/GLLogger(2536): couldn't load <libhgl.so> library (Cannot > > > >> > > > >>>> find > > > >> > > > >>>> library) > > > >> > > > >>>> I/SurfaceFlinger(2536): EGL informations: > > > >> > > > >>>> I/SurfaceFlinger(2536): # of configs : 6 > > > >> > > > >>>> I/SurfaceFlinger(2536): vendor : Android > > > >> > > > >>>> I/SurfaceFlinger(2536): version : 1.31 Android META-EGL > > > >> > > > >>>> I/SurfaceFlinger(2536): extensions: > > > >> > > > >>>> I/SurfaceFlinger(2536): Client API: OpenGL ES > > > >> > > > >>>> E/GLLogger (2536) validate_display_surface:488 error 300d > > > >> > > > >>>> (EGL_BAD_SURFACE) > > > >> > > > >>>> W/SurfaceFlinger(2536): ro.sf.lcd_density not defined, > > > >> > > > >>>> using 160 > > > >> > > > >>>> dpi > > > >> > > > >>>> by default. > > > >> > > > >>>> E/GLLogger (2536): call to OpenGL ES API with no current > > > >> > > > >>>> context > > > >> > > > >>>> I/SurfaceFlinger(2536): OpenGL informations: > > > >> > > > >>>> E/GLLogger (2536): call to OpenGL ES API with no current > > > >> > > > >>>> context > > > >> > > > >>>> D/Zygote (2535): Process 2536 terminated by signal (11) > > > >> > > > >>>> I/Zygote (2535): Exit Zygote because system server (2536) > > > >> > > > >>>> has > > > >> > > > >>>> terminated > > > > >> > > > >>>> As you said, libhgl.so problem is probably not important > > > >> > > > >>>> but for > > > >> > > > >>>> some > > > >> > > > >>>> reason SurfaceFlinger is terminated (segfault) and > > > >> > > > >>>> therefore, > > > >> > > > >>>> Zygote > > > >> > > > >>>> fails to start (better say is terminated) as well. > > > > >> > > > >>>> BTW: Is there any possibility how to access console if I > > > >> > > > >>>> specify > > > >> > > > >>>> vga > > > >> > > > >>>> parameter? And, is there any possibility how to > > > >> > > > >>>> getlogcatoutput > > > >> > > > >>>> from > > > >> > > > >>>> VirtualBox window - some copy&paste or > > > >> > > > >>>> accessinglogcatoutput file > > > >> > > > >>>> (if I redirectedlogcatoutput to the file)? > > > > >> > > > >>>> Frank > > > > >> > > > >>>> On Apr 26, 3:56 am, Yi Sun <[email protected]> wrote: > > > >> > > > >>>>> The libhgl error is harmless, please send us > > > >> > > > >>>>> thelogcatoutput and > > > >> > > > >>>>> make sure you are using right frame buffer driver as > > > >> > > > >>>>> mentioned > > > >> > > > >>>>> in the > > > >> > > > >>>>> wiki > > > > >> > > > >>>>> On Apr 25, 2009, at 10:12 AM, FrankieCZ > > > >> > > > >>>>> <[email protected]> > > > >> > > > >>>>> wrote: > > > > >> > > > >>>>>> Problem is solved. I did everything again and problem with > > > >> > > > >>>>>> dalvik- > > > >> > > > >>>>>> cache is not present (seems there was some problem during > > > >> > > > >>>>>> creating img > > > >> > > > >>>>>> file, evenly i've tried it twice...). Now, I have another > > > >> > > > >>>>>> problem, > > > >> > > > >>>>>> which is related to SurfaceFlinger and problem with: > > > > >> > > > >>>>>> 608 E/GLLogger( 441): couldn't load <libhgl.so> library > > > >> > > > >>>>>> (Cannot find > > > >> > > > >>>>>> library) > > > > >> > > > >>>>>> and segfault problem...so GUI is not starting still :( > > > > >> > > > >>>>>> This seems to be more common problem (as far as I could > > > >> > > > >>>>>> see more > > > >> > > > >>>>>> people facing with it), so I'm trying to figure out how > > > >> > > > >>>>>> to solve > > > >> > > > >>>>>> it.... > > > > >> > > > >>>>>> Anyway, thanks, > > > > >> > > > >>>>>> Frank > > > > >> > > > >>>>>> On Apr 25, 6:06 pm, Chen Yang <[email protected]> > > > >> > > > >>>>>> wrote: > > > >> > > > >>>>>>> You may be able to reference the init.rc to see which > > > >> > > > >>>>>>> partition is > > > >> > > > >>>>>>> mounted as /data( by default it seems to be > > > >> > > > >>>>>>> /dev/block/sda8), > > > >> > > > >>>>>>> do you > > > >> > > > >>>>>>> have the right partition and file system type(ext3)? > > > >> > > > >>>>>>> -- > > > >> > > > >>>>>>> Chen > > > > >> > > > >>>>>>> On Sat, Apr 25, 2009 at 11:57 PM, FrankieCZ > > > >> > > > >>>>>>> <[email protected]> > > > >> > > > >>>>>>> wrote: > > > > >> > > > >>>>>>>> Hi all, > > > > >> > > > >>>>>>>> I've tried to port Android on my x86 laptop and run it > > > >> > > > >>>>>>>> inside > > > >> > > > >>>>>>>> VirtualBox. I was following this tutorial: > > > > >> > >http://code.google.com/p/patch-hosting-for-android-x86-support/wiki/B > > > >> > > > >>>>>>>> ... > > > > >> > > > >>>>>>>> Everything went smoothly but when I try to boot, I'm > > > >> > > > >>>>>>>> staying > > > >> > > > >>>>>>>> stuck > > > >> > > > >>>>>>>> with black screen (alt+f1 console does not work). If I > > > >> > > > >>>>>>>> don't > > > >> > > > >>>>>>>> specify > > > >> > > > >>>>>>>> vga=XXX parameter (cmdline during booting) I can boot to > > > >> > > > >>>>>>>> console > > > >> > > > >>>>>>>> mode, > > > >> > > > >>>>>>>> after I can uselogcat, which tells me: > > > > >> > > > >>>>>>>> ... > > > >> > > > >>>>>>>> Can't open dex cache '/data/dalvik-cache/ > > > >> > > > >>>>>>>> sys...@framew...@[email protected]': No such file > > ... > > read more » --~--~---------~--~----~------------~-------~--~----~ unsubscribe: [email protected] website: http://groups.google.com/group/android-porting -~----------~----~----~----~------~----~------~--~---
