Jim Huang wrote: > 2009/9/15 sanyanniesunney anniesunney <[email protected]>: >> mmc0: new high speed SD card at address b368 >> mmcblk0: mmc0:b368 SDC 970 MiB >> mmcblk0: p1 >> Welcome to 0xdroid Image Installer >> > > It looks that SD card was about to be mounted. > >> Mounting SD card... >> mount: mounting /dev/mmcblk0p1 on /mmcblk0p1 failed: Device or resource busy >> Press [Enter] to activate shell >> Erase NAND flash (File System) >> Input file is not page-aligned. Use the padding option. >> Data was only partially written due to error >> : Success >> /write_flash: exit: line 14: Illegal number: -1 >> Writing android-beagle.ubi into NAND flash... >> > > Thanks for your report. We at 0xlab mainly tested on Beagleboard rev > C2. Few rev B? series were partially tested.
I have used Embinux Android port and it worked fine on B2 board http://labs.embinux.org/index.php/Android_Porting_Guide_to_Beagle_Board > > To help you know about the details, I think you should have more > background knowledge about Beagleboard and Linux. Ångström is a good > start point: > http://www.angstrom-distribution.org/ > > Of course, Beagleboard website: > http://beagleboard.org/ > > Since the list is regarding android pointing, we ought to focus on > porting itself. > > Sincerely, > Jim Huang (jserv) > http://0xlab.org/ > > > > --~--~---------~--~----~------------~-------~--~----~ unsubscribe: [email protected] website: http://groups.google.com/group/android-porting -~----------~----~----~----~------~----~------~--~---
