Hi all, I dont know wat happeend...Now my o/p is like this...
OMAP3530-GP rev 2, CPU-OPP2 L3-165MHz OMAP3 Beagle Board + LPDDR/NAND DRAM: 128 MB NAND: 256 MiB In: serial Out: serial Err: serial Audio Tone on Speakers ... complete Hit any key to stop autoboot: 0 Unknown command 'if' - try 'help' Unknown command 'then' - try 'help' Unknown command 'then' - try 'help' Unknown command 'else' - try 'help' Unknown command 'then' - try 'help' Unknown command 'then' - try 'help' Unknown command 'else' - try 'help' Unknown command 'fi' - try 'help' Unknown command 'else' - try 'help' Unknown command 'fi' - try 'help' Unknown command 'fi' - try 'help' Unknown command 'else' - try 'help' Unknown command 'fi' - try 'help' I dunno how to proceed...plz help On Sep 16, 10:24 am, Jim Huang <[email protected]> wrote: > 2009/9/16 sany <[email protected]>: > > > Erase NAND flash (File System) > > Writing android-beagle.ubi into NAND flash... > > File System :: Done! > > Erase NAND flash (Kernel) > > Writing 0xkernel-beagle.bin into NAND flash... > > Kernel :: Done! > > Erase NAND flash (U-Boot Env) > > Writing into NAND flash... > > U-Boot Env :: Done! > > Good. Then, please unplug SD card from SD/MMC slot. After rest, > Android shall be able to boot from > NAND flash. > > Sincerely, > Jim Huang (jserv)http://0xlab.org/ --~--~---------~--~----~------------~-------~--~----~ unsubscribe: [email protected] website: http://groups.google.com/group/android-porting -~----------~----~----~----~------~----~------~--~---
