Sorry...My image name that i had given was wrong,,, Now my output is as follows,
Mounting SD card... mount: mounting /dev/mmcblk0p1 on /mmcblk0p1 failed: Device or resource busy Press [Enter] to activate shell Erase NAND flash (File System) Writing android-beagle.ubi into NAND flash... File System :: Done! Erase NAND flash (Kernel) Writing 0xkernel-beagle.bin into NAND flash... Kernel :: Done! Erase NAND flash (U-Boot Env) Writing into NAND flash... U-Boot Env :: Done! It remains on this screen.... Plz help.... On Sep 16, 10:09 am, pavan savoy <[email protected]> wrote: > sany, > > the way it works is something like this, > the 3 files listed needs to be copied to RAM to boot from it. > > So, do a > fatload mmc 0 80600000 uimage.bin -- not mmcinit ... > then do a bootm 80600000 -- the size of uimage.bin should be equal to > the size of the pre-built binary that you have received - this ensures > that your partition isn't screwed up. > > Try the same with other files and check which one actually boots !!! > > regards, > Pavan > > > > On Wed, Sep 16, 2009 at 10:36 AM, sany <[email protected]> wrote: > > > Hi Pavan , > > > Here are my outputs, > > > OMAP3 beagleboard.org # fatls mmc 0 > > 1956784 uimage.bin > > 2161864 0xkernel-beagle.bin > > 34734080 android-beagle.ubi > > > 3 file(s), 0 dir(s) > > > OMAP3 beagleboard.org # fatload mmcinit 0 80600000 uImage > > > ** Unable to use mmcinit 0:1 for fatload ** > > > What must i do? > > PLz help! > > > On Sep 16, 8:59 am, sanyanniesunney anniesunney > > <[email protected]> wrote: > >> Hi Jim, > > >> As i said earlier,we require Android 1.5 version.The guide you mentioned > >> has > >> ported Android 1.1 which is not supporting the applications we have > >> developed. > > >> Thanks, > >> Sany > > >> On Tue, Sep 15, 2009 at 10:14 PM, shankarGanesh > >> <[email protected]>wrote: > > >> > Jim Huang wrote: > >> > > 2009/9/15 sanyanniesunney anniesunney <[email protected]>: > >> > >> mmc0: new high speed SD card at address b368 > >> > >> mmcblk0: mmc0:b368 SDC 970 MiB > >> > >> mmcblk0: p1 > >> > >> Welcome to 0xdroid Image Installer > > >> > > It looks that SD card was about to be mounted. > > >> > >> Mounting SD card... > >> > >> mount: mounting /dev/mmcblk0p1 on /mmcblk0p1 failed: Device or > >> > >> resource > >> > busy > >> > >> Press [Enter] to activate shell > >> > >> Erase NAND flash (File System) > >> > >> Input file is not page-aligned. Use the padding option. > >> > >> Data was only partially written due to error > >> > >> : Success > >> > >> /write_flash: exit: line 14: Illegal number: -1 > >> > >> Writing android-beagle.ubi into NAND flash... > > >> > > Thanks for your report. We at 0xlab mainly tested on Beagleboard rev > >> > > C2. Few rev B? series were partially tested. > > >> > I have used Embinux Android port and it worked fine on B2 board > > >> >http://labs.embinux.org/index.php/Android_Porting_Guide_to_Beagle_Board > > >> > > To help you know about the details, I think you should have more > >> > > background knowledge about Beagleboard and Linux. Ångström is a good > >> > > start point: > >> > > http://www.angstrom-distribution.org/ > > >> > > Of course, Beagleboard website: > >> > > http://beagleboard.org/ > > >> > > Since the list is regarding android pointing, we ought to focus on > >> > > porting itself. > > >> > > Sincerely, > >> > > Jim Huang (jserv) > >> > >http://0xlab.org/ > > -- > --Pavan Savoy --~--~---------~--~----~------------~-------~--~----~ unsubscribe: [email protected] website: http://groups.google.com/group/android-porting -~----------~----~----~----~------~----~------~--~---
