Hi Jim, I am using Beagle Board Rev B5.... So u saying i cant use those images on my board?
On Tue, Sep 15, 2009 at 9:30 PM, Jim Huang <[email protected]> wrote: > > 2009/9/15 sanyanniesunney anniesunney <[email protected]>: > > mmc0: new high speed SD card at address b368 > > mmcblk0: mmc0:b368 SDC 970 MiB > > mmcblk0: p1 > > Welcome to 0xdroid Image Installer > > > > It looks that SD card was about to be mounted. > > > Mounting SD card... > > mount: mounting /dev/mmcblk0p1 on /mmcblk0p1 failed: Device or resource > busy > > Press [Enter] to activate shell > > Erase NAND flash (File System) > > Input file is not page-aligned. Use the padding option. > > Data was only partially written due to error > > : Success > > /write_flash: exit: line 14: Illegal number: -1 > > Writing android-beagle.ubi into NAND flash... > > > > Thanks for your report. We at 0xlab mainly tested on Beagleboard rev > C2. Few rev B? series were partially tested. > > To help you know about the details, I think you should have more > background knowledge about Beagleboard and Linux. Ångström is a good > start point: > http://www.angstrom-distribution.org/ > > Of course, Beagleboard website: > http://beagleboard.org/ > > Since the list is regarding android pointing, we ought to focus on > porting itself. > > Sincerely, > Jim Huang (jserv) > http://0xlab.org/ > > > > --~--~---------~--~----~------------~-------~--~----~ unsubscribe: [email protected] website: http://groups.google.com/group/android-porting -~----------~----~----~----~------~----~------~--~---
