Ok. here is a question? Are you able to auto boot? If yes Share me your normal.scr file content.
On Fri, Sep 25, 2009 at 2:26 AM, sanyanniesunney anniesunney < [email protected]> wrote: > when i set the bootcmd and provide the address as 0x80200000, > then it gives me the foll o/p > > ** Unable to use mmc 0:1 for fatload ** > > > On Fri, Sep 25, 2009 at 2:52 PM, Kaushik(ICMAN) < > [email protected]> wrote: > >> can u change the address to 0x80200000 at both places in bootcmd...I guess >> that is your problem. Let me know after checking. >> >> >> On Fri, Sep 25, 2009 at 2:15 AM, sanyanniesunney anniesunney < >> [email protected]> wrote: >> >>> When i print the bootargs it is printing correctly.. >>> But when i am trying ti seteenv bootargs i am getting the following >>> error.. >>> >>> OMAP3 beagleboard.org # setenv bootcmd mmcinit;fatload mmc 0 0x80300000 >>> uImage;bootm 0x80300000 >>> >>> ** Unable to use mmc 0:1 for fatload ** >>> Wrong Image Format for bootm command >>> ERROR: can't get kernel image! >>> >>> Why is this so? >>> >>> On Fri, Sep 25, 2009 at 2:32 PM, Kaushik(ICMAN) < >>> [email protected]> wrote: >>> >>>> Can you make sure that you followed ...the steps mentioned in the >>>> link below. I believe that your bootargs are wrong. >>>> >>>> http://kaushikprajapati.wordpress.com/2009/09/20/33/ >>>> <http://kaushikprajapati.wordpress.com/2009/09/20/33/> >>>> >>>> On Fri, Sep 25, 2009 at 1:56 AM, sanyanniesunney anniesunney < >>>> [email protected]> wrote: >>>> >>>>> Yes i am using the beagle board.. >>>>> and i am also booting from the SD card! >>>>> >>>>> what should i do.... >>>>> >>>>> On Fri, Sep 25, 2009 at 2:09 PM, Kaushik(ICMAN) < >>>>> [email protected]> wrote: >>>>> >>>>>> I believe the address is wrong. Are you using beagleboard?? and >>>>>> booting from SD card?? >>>>>> >>>>>> >>>>>> On Fri, Sep 25, 2009 at 1:23 AM, sanyanniesunney anniesunney < >>>>>> [email protected]> wrote: >>>>>> >>>>>>> Hi, >>>>>>> >>>>>>> I have already done this and my o/p at the minicom terminal was like >>>>>>> this, >>>>>>> >>>>>>> Texas Instruments X-Loader 1.41 >>>>>>> Starting OS Bootloader... >>>>>>> >>>>>>> >>>>>>> U-Boot 2008.10-rc2 (Oct 2 2008 - 09:02:46) >>>>>>> >>>>>>> OMAP3530-GP rev 2, CPU-OPP2 L3-165MHz >>>>>>> OMAP3 Beagle board + LPDDR/NAND >>>>>>> DRAM: 128 MB >>>>>>> NAND: 256 MiB >>>>>>> In: serial >>>>>>> Out: serial >>>>>>> Err: serial >>>>>>> Hit any key to stop autoboot: 0 >>>>>>> reading uImage >>>>>>> >>>>>>> 1820016 bytes read >>>>>>> ## Booting kernel from Legacy Image at 80300000 ... >>>>>>> Image Name: Linux-2.6.29-omap1 >>>>>>> Image Type: ARM Linux Kernel Image (uncompressed) >>>>>>> Data Size: 1819952 Bytes = 1.7 MB >>>>>>> Load Address: 00008000 >>>>>>> Entry Point: 00008000 >>>>>>> Verifying Checksum ... OK >>>>>>> Loading Kernel Image ... >>>>>>> It get stuck at this point! >>>>>>> Now i dunno how to proceed! >>>>>>> >>>>>>> On Fri, Sep 25, 2009 at 12:59 PM, Kaushik(ICMAN) < >>>>>>> [email protected]> wrote: >>>>>>> >>>>>>>> Enabling Network >>>>>>>> >>>>>>>> - Connect eth0 interface to usb hub via ethernet to usb >>>>>>>> converter >>>>>>>> - Edit init.rc from <Android_RFS>/init.rc >>>>>>>> >>>>>>>> #basic network init >>>>>>>> setprop net.dns1 <primary-dns-server-ip> >>>>>>>> >>>>>>>> >>>>>>>> - Boot Beagle board >>>>>>>> - Execute following commands from minicom >>>>>>>> >>>>>>>> $netcfg eth0 up >>>>>>>> $netcfg eth0 dhcp >>>>>>>> >>>>>>>> *NOTE:-* Enable appropriate driver for your "ethernet to usb >>>>>>>> converter" in kernel. Driver can be found at :- >>>>>>>> >>>>>>>> │ -> DeviceDrivers │ │ -> Network device support (NETDEVICES[=y]) │ >>>>>>>> │ -> USB Network Adapters >>>>>>>> >>>>>>>> On Fri, Sep 25, 2009 at 12:29 AM, Kaushik(ICMAN) < >>>>>>>> [email protected]> wrote: >>>>>>>> >>>>>>>>> You can do make menuconfig and try to find out the driver for >>>>>>>>> your device and then create new uImage that will have the USB network >>>>>>>>> Adpater driver. >>>>>>>>> >>>>>>>>> http://kaushikprajapati.wordpress.com/2009/09/25/a-hand-out-on-how-to-do-make-menuconfig-on-android-kernel/ >>>>>>>>> >>>>>>>>> >>>>>>>>> <http://kaushikprajapati.wordpress.com/2009/09/25/a-hand-out-on-how-to-do-make-menuconfig-on-android-kernel/> >>>>>>>>> >>>>>>>>> On Fri, Sep 25, 2009 at 12:26 AM, sanyanniesunney anniesunney < >>>>>>>>> [email protected]> wrote: >>>>>>>>> >>>>>>>>>> I am using USB ethernet adapter,whose one end is connected to the >>>>>>>>>> USB hub and the other end is connected to the ethernet cable..... >>>>>>>>>> >>>>>>>>>> On Fri, Sep 25, 2009 at 12:38 PM, Kaushik(ICMAN) < >>>>>>>>>> [email protected]> wrote: >>>>>>>>>> >>>>>>>>>>> Are you trying to use USB to Ethernet cable or you are trying to >>>>>>>>>>> use USB OTG for Ethenet access? >>>>>>>>>>> >>>>>>>>>>> On Fri, Sep 25, 2009 at 12:05 AM, sany >>>>>>>>>>> <[email protected]>wrote: >>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Hello all, >>>>>>>>>>>> >>>>>>>>>>>> Has anyone been able to enable the ethernet interface on embinux >>>>>>>>>>>> kernel? >>>>>>>>>>>> >>>>>>>>>>>> Plzzzzzz help!!!!!!!! >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> With Regards, >>>>>>>>>>> Kaushik Prajapati >>>>>>>>>>> Grad. Student >>>>>>>>>>> San Jose State Uni. >>>>>>>>>>> 408-821-5891 >>>>>>>>>>> Pablo >>>>>>>>>>> Picasso<http://www.brainyquote.com/quotes/authors/p/pablo_picasso.html> >>>>>>>>>>> - "Computers are useless. They can only give you answers." >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> With Regards, >>>>>>>>> Kaushik Prajapati >>>>>>>>> Grad. Student >>>>>>>>> San Jose State Uni. >>>>>>>>> 408-821-5891 >>>>>>>>> Samuel >>>>>>>>> Goldwyn<http://www.brainyquote.com/quotes/authors/s/samuel_goldwyn.html> >>>>>>>>> - "I'm willing to admit that I may not always be right, but I am >>>>>>>>> never >>>>>>>>> wrong." >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> With Regards, >>>>>>>> Kaushik Prajapati >>>>>>>> Grad. Student >>>>>>>> San Jose State Uni. >>>>>>>> 408-821-5891 >>>>>>>> Joan >>>>>>>> Crawford<http://www.brainyquote.com/quotes/authors/j/joan_crawford.html> >>>>>>>> - "I, Joan Crawford, I believe in the dollar. Everything I earn, I >>>>>>>> spend." >>>>>>>> >>>>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> With Regards, >>>>>> Kaushik Prajapati >>>>>> Grad. Student >>>>>> San Jose State Uni. >>>>>> 408-821-5891 >>>>>> Charles de >>>>>> Gaulle<http://www.brainyquote.com/quotes/authors/c/charles_de_gaulle.html> >>>>>> - "The better I get to know men, the more I find myself loving dogs." >>>>>> >>>>>> >>>> >>>> >>>> -- >>>> With Regards, >>>> Kaushik Prajapati >>>> Grad. Student >>>> San Jose State Uni. >>>> 408-821-5891 >>>> Ted Turner<http://www.brainyquote.com/quotes/authors/t/ted_turner.html> - >>>> "Sports is like a war without the killing." >>>> >>>> >>>> >>>> >>>> >> >> >> -- >> With Regards, >> Kaushik Prajapati >> Grad. Student >> San Jose State Uni. >> 408-821-5891 >> Marie von >> Ebner-Eschenbach<http://www.brainyquote.com/quotes/authors/m/marie_von_ebnereschenbac.html> >> - "Even a stopped clock is right twice a day." >> >> >> >> >> >> -- With Regards, Kaushik Prajapati Grad. Student San Jose State Uni. 408-821-5891 Charles de Gaulle<http://www.brainyquote.com/quotes/authors/c/charles_de_gaulle.html> - "The better I get to know men, the more I find myself loving dogs." --~--~---------~--~----~------------~-------~--~----~ unsubscribe: [email protected] website: http://groups.google.com/group/android-porting -~----------~----~----~----~------~----~------~--~---
