yes, I am sure you have not formatted your SD card properly and missing some
important files as well. You might want to follow the link below in order to
get everything working. It explains everything about getting it ready.
http://kaushikprajapati.wordpress.com/2009/09/20/33/

<http://kaushikprajapati.wordpress.com/2009/09/20/33/>

On Fri, Sep 25, 2009 at 2:36 AM, sanyanniesunney anniesunney <
[email protected]> wrote:

> No sorry...I am not able to autoboot also...
>  It reaches the point ,Loading kernel image.....
> Then it is stuck....
> (By autoboot,i understood as,the o/p that appears on booting the board
> without any env var setting through minicom terminal)
>
>
> By the by where is this normal.scr file?
> I dont have such a file
>
> On Fri, Sep 25, 2009 at 3:00 PM, Kaushik(ICMAN) <
> [email protected]> wrote:
>
>> Ok. here is a question?
>> Are you able to auto boot? If yes Share me your normal.scr file content.
>>
>>
>>
>> On Fri, Sep 25, 2009 at 2:26 AM, sanyanniesunney anniesunney <
>> [email protected]> wrote:
>>
>>> when i set the bootcmd and provide the address as 0x80200000,
>>> then it gives me the foll o/p
>>>
>>> ** Unable to use mmc 0:1 for fatload **
>>>
>>>
>>>   On Fri, Sep 25, 2009 at 2:52 PM, Kaushik(ICMAN) <
>>> [email protected]> wrote:
>>>
>>>>  can u change the address to 0x80200000 at both places in bootcmd...I
>>>> guess that is your problem. Let me know after checking.
>>>>
>>>>
>>>> On Fri, Sep 25, 2009 at 2:15 AM, sanyanniesunney anniesunney <
>>>> [email protected]> wrote:
>>>>
>>>>> When i print the bootargs it is printing correctly..
>>>>> But when i am trying ti seteenv bootargs i am getting the following
>>>>> error..
>>>>>
>>>>> OMAP3 beagleboard.org # setenv bootcmd mmcinit;fatload mmc 0
>>>>> 0x80300000 uImage;bootm 0x80300000
>>>>>
>>>>> ** Unable to use mmc 0:1 for fatload **
>>>>> Wrong Image Format for bootm command
>>>>> ERROR: can't get kernel image!
>>>>>
>>>>> Why is this so?
>>>>>
>>>>>   On Fri, Sep 25, 2009 at 2:32 PM, Kaushik(ICMAN) <
>>>>> [email protected]> wrote:
>>>>>
>>>>>>   Can you make sure that you followed ...the steps mentioned in the
>>>>>> link below. I believe that your bootargs are wrong.
>>>>>>
>>>>>> http://kaushikprajapati.wordpress.com/2009/09/20/33/
>>>>>>     <http://kaushikprajapati.wordpress.com/2009/09/20/33/>
>>>>>>
>>>>>> On Fri, Sep 25, 2009 at 1:56 AM, sanyanniesunney anniesunney <
>>>>>> [email protected]> wrote:
>>>>>>
>>>>>>> Yes i am using the beagle board..
>>>>>>> and i am also booting from the SD card!
>>>>>>>
>>>>>>> what should i do....
>>>>>>>
>>>>>>>   On Fri, Sep 25, 2009 at 2:09 PM, Kaushik(ICMAN) <
>>>>>>> [email protected]> wrote:
>>>>>>>
>>>>>>>>  I believe the address is wrong. Are you using beagleboard??  and
>>>>>>>> booting from SD card??
>>>>>>>>
>>>>>>>>
>>>>>>>> On Fri, Sep 25, 2009 at 1:23 AM, sanyanniesunney anniesunney <
>>>>>>>> [email protected]> wrote:
>>>>>>>>
>>>>>>>>> Hi,
>>>>>>>>>
>>>>>>>>> I have already done this and my o/p at the minicom terminal was
>>>>>>>>> like this,
>>>>>>>>>
>>>>>>>>> Texas Instruments X-Loader 1.41
>>>>>>>>> Starting OS Bootloader...
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> U-Boot 2008.10-rc2 (Oct  2 2008 - 09:02:46)
>>>>>>>>>
>>>>>>>>> OMAP3530-GP rev 2, CPU-OPP2 L3-165MHz
>>>>>>>>> OMAP3 Beagle board + LPDDR/NAND
>>>>>>>>> DRAM:  128 MB
>>>>>>>>> NAND:  256 MiB
>>>>>>>>> In:    serial
>>>>>>>>> Out:   serial
>>>>>>>>> Err:   serial
>>>>>>>>> Hit any key to stop autoboot:  0
>>>>>>>>> reading uImage
>>>>>>>>>
>>>>>>>>> 1820016 bytes read
>>>>>>>>> ## Booting kernel from Legacy Image at 80300000 ...
>>>>>>>>>    Image Name:   Linux-2.6.29-omap1
>>>>>>>>>    Image Type:   ARM Linux Kernel Image (uncompressed)
>>>>>>>>>    Data Size:    1819952 Bytes =  1.7 MB
>>>>>>>>>    Load Address: 00008000
>>>>>>>>>    Entry Point:  00008000
>>>>>>>>>    Verifying Checksum ... OK
>>>>>>>>>    Loading Kernel Image ...
>>>>>>>>>  It get stuck at this point!
>>>>>>>>> Now i dunno how to proceed!
>>>>>>>>>
>>>>>>>>>   On Fri, Sep 25, 2009 at 12:59 PM, Kaushik(ICMAN) <
>>>>>>>>> [email protected]> wrote:
>>>>>>>>>
>>>>>>>>>>   Enabling Network
>>>>>>>>>>
>>>>>>>>>>    - Connect eth0 interface to usb hub via ethernet to usb
>>>>>>>>>>    converter
>>>>>>>>>>    - Edit init.rc from <Android_RFS>/init.rc
>>>>>>>>>>
>>>>>>>>>> #basic network init
>>>>>>>>>> setprop net.dns1 <primary-dns-server-ip>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>    - Boot Beagle board
>>>>>>>>>>    - Execute following commands from minicom
>>>>>>>>>>
>>>>>>>>>> $netcfg eth0 up
>>>>>>>>>> $netcfg eth0 dhcp
>>>>>>>>>>
>>>>>>>>>> *NOTE:-* Enable appropriate driver for your "ethernet to usb
>>>>>>>>>> converter" in kernel. Driver can be found at :-
>>>>>>>>>>
>>>>>>>>>> │ -> DeviceDrivers │ │ -> Network device support (NETDEVICES[=y])
>>>>>>>>>> │ │ -> USB Network Adapters
>>>>>>>>>>
>>>>>>>>>>   On Fri, Sep 25, 2009 at 12:29 AM, Kaushik(ICMAN) <
>>>>>>>>>> [email protected]> wrote:
>>>>>>>>>>
>>>>>>>>>>>  You can do make menuconfig and try to find out the driver for
>>>>>>>>>>> your device and then create new uImage that will have the USB 
>>>>>>>>>>> network
>>>>>>>>>>> Adpater driver.
>>>>>>>>>>>
>>>>>>>>>>> http://kaushikprajapati.wordpress.com/2009/09/25/a-hand-out-on-how-to-do-make-menuconfig-on-android-kernel/
>>>>>>>>>>>
>>>>>>>>>>>   
>>>>>>>>>>> <http://kaushikprajapati.wordpress.com/2009/09/25/a-hand-out-on-how-to-do-make-menuconfig-on-android-kernel/>
>>>>>>>>>>>
>>>>>>>>>>> On Fri, Sep 25, 2009 at 12:26 AM, sanyanniesunney anniesunney <
>>>>>>>>>>> [email protected]> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> I am using USB ethernet adapter,whose one end is connected to
>>>>>>>>>>>> the USB hub and the other end is connected to the ethernet 
>>>>>>>>>>>> cable.....
>>>>>>>>>>>>
>>>>>>>>>>>>  On Fri, Sep 25, 2009 at 12:38 PM, Kaushik(ICMAN) <
>>>>>>>>>>>> [email protected]> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Are you trying to use USB to Ethernet cable or you are trying
>>>>>>>>>>>>> to use USB OTG for Ethenet access?
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Fri, Sep 25, 2009 at 12:05 AM, sany <
>>>>>>>>>>>>> [email protected]> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hello all,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Has anyone been able to enable the ethernet interface on
>>>>>>>>>>>>>> embinux
>>>>>>>>>>>>>> kernel?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Plzzzzzz help!!!!!!!!
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> --
>>>>>>>>>>>>> With Regards,
>>>>>>>>>>>>> Kaushik Prajapati
>>>>>>>>>>>>> Grad. Student
>>>>>>>>>>>>> San Jose State Uni.
>>>>>>>>>>>>> 408-821-5891
>>>>>>>>>>>>> Pablo 
>>>>>>>>>>>>> Picasso<http://www.brainyquote.com/quotes/authors/p/pablo_picasso.html>
>>>>>>>>>>>>>  - "Computers are useless. They can only give you answers."
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>> With Regards,
>>>>>>>>>>> Kaushik Prajapati
>>>>>>>>>>> Grad. Student
>>>>>>>>>>> San Jose State Uni.
>>>>>>>>>>> 408-821-5891
>>>>>>>>>>> Samuel 
>>>>>>>>>>> Goldwyn<http://www.brainyquote.com/quotes/authors/s/samuel_goldwyn.html>
>>>>>>>>>>>  - "I'm willing to admit that I may not always be right, but I am 
>>>>>>>>>>> never
>>>>>>>>>>> wrong."
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> With Regards,
>>>>>>>>>> Kaushik Prajapati
>>>>>>>>>> Grad. Student
>>>>>>>>>> San Jose State Uni.
>>>>>>>>>> 408-821-5891
>>>>>>>>>> Joan 
>>>>>>>>>> Crawford<http://www.brainyquote.com/quotes/authors/j/joan_crawford.html>
>>>>>>>>>>  - "I, Joan Crawford, I believe in the dollar. Everything I earn, I 
>>>>>>>>>> spend."
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> With Regards,
>>>>>>>> Kaushik Prajapati
>>>>>>>> Grad. Student
>>>>>>>> San Jose State Uni.
>>>>>>>> 408-821-5891
>>>>>>>> Charles de 
>>>>>>>> Gaulle<http://www.brainyquote.com/quotes/authors/c/charles_de_gaulle.html>
>>>>>>>>  - "The better I get to know men, the more I find myself loving dogs."
>>>>>>>>
>>>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> With Regards,
>>>>>> Kaushik Prajapati
>>>>>> Grad. Student
>>>>>> San Jose State Uni.
>>>>>> 408-821-5891
>>>>>> Ted Turner<http://www.brainyquote.com/quotes/authors/t/ted_turner.html> 
>>>>>> - "Sports is like a war without the killing."
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>
>>>>
>>>> --
>>>> With Regards,
>>>> Kaushik Prajapati
>>>> Grad. Student
>>>> San Jose State Uni.
>>>> 408-821-5891
>>>> Marie von 
>>>> Ebner-Eschenbach<http://www.brainyquote.com/quotes/authors/m/marie_von_ebnereschenbac.html>
>>>>  - "Even a stopped clock is right twice a day."
>>>>
>>>>
>>>>
>>>>
>>>>
>>
>>
>> --
>> With Regards,
>> Kaushik Prajapati
>> Grad. Student
>> San Jose State Uni.
>> 408-821-5891
>> Charles de 
>> Gaulle<http://www.brainyquote.com/quotes/authors/c/charles_de_gaulle.html> - 
>> "The better I get to know men, the more I find myself loving dogs."
>>
>>   >>
>>


-- 
With Regards,
Kaushik Prajapati
Grad. Student
San Jose State Uni.
408-821-5891
Ted Turner <http://www.brainyquote.com/quotes/authors/t/ted_turner.html>  -
"Sports is like a war without the killing."

--~--~---------~--~----~------------~-------~--~----~
unsubscribe: [email protected]
website: http://groups.google.com/group/android-porting
-~----------~----~----~----~------~----~------~--~---

Reply via email to